Prototyping

SKU: SF-PRT-14494 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. ...

SKU: AF-1057 | Brand: Adafruit

You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated...

SKU: AF-4100 | Brand: Adafruit

Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these al...

SKU: PI-COM1503 | Brand: Pimoroni

Ahhhh capacitors - the circuit builders' most reliable and trusted friend - always keen to jump in and provide stability where needed to your signals and power supply. 0.1uF - 1uF are great all-purpose bypass capac...

SKU: AF-3643 | Brand: Adafruit

A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it ...

SKU: TB-RR2774 | Brand: Little Bird

A pack of two 1 kΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specificat...

SKU: AF-1504 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in green. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. ...

SKU: AF-1493 | Brand: Adafruit

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissi...

SKU: AF-1502 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in yellow. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel....

SKU: TB-HB6015 | Brand: Little Bird

Manufactured from ABS plastic, these jiffy boxes not only look great, they have been designed to incorporate everything our customers wanted in a constructor's box. Sizes are compliant with industry standards ...

SKU: AF-2138 | Brand: Adafruit

A compact 2-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...

SKU: AF-2006 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1881 | Brand: Adafruit

A 2-metre length of black 26AWG stranded-core wire with a flexible silicone sheath. Silicone-covered wire is significantly more supple and heat-resistant than standard PVC wire — rated to handle up to 200 °C and 600 V...

SKU: TB-RR0596 | Brand: Little Bird

A pack of eight 10kΩ metal film resistors rated at 0.5W (½W) with 1% tolerance. Despite the higher power rating, these resistors are the same physical size as standard ¼W carbon film types, making them a drop-in upgra...

SKU: AF-2165 | Brand: Adafruit

A popular low-dropout (LDO) 3.3 V linear voltage regulator based on the LD1117 in a TO-220 package. With approximately 1 V dropout and up to 800 mA output current, it cleanly steps down 5–15 V supplies to a regulated ...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: AF-2463 | Brand: Adafruit

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 4x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have...

SKU: DF-FIT0188 | Brand: DFRobot

A compact 10-segment LED bar graph in super bright red. Each segment is an individual LED housed together in a standard-size package, making it easy to drive from a microcontroller or shift register. Low power consump...

SKU: SF-COM-09288 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from...

SKU: SF-PRT-09279 | Brand: SparkFun

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet