Prototyping

SKU: SF-COM-00543 | Brand: SparkFun

Resonators function like crystals but stick closer to their specified frequency over a full temperature range. These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors s...

SKU: AF-1542 | Brand: Adafruit

These single-row right-angle female headers with 0.1" (2.54mm) pitch are an essential building block for electronics projects. Use them to add right-angle socket connections to perfboards, PCBs, and prototyping setups...

SKU: TB-HB6065 | Brand: Little Bird

4 cases in the range. The two smaller sizes have moulded in square cable entries on each end, and holes for screw bolts to mount the case. Specifications Width ...

SKU: AF-1764 | Brand: Adafruit

Simple but effective - this breakout board has a USB Mini-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.Comes with one fully...

SKU: AF-1762 | Brand: Adafruit

These breakout PCBs make it easy to use 5050-size SMD LEDs on a solderless breadboard. Solder a 5050 LED to either side of the PCB and the pins drop straight into standard 0.1″ breadboard rows — no adapter wiring need...

SKU: AF-1794 | Brand: Adafruit

When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...

SKU: SS-320990008 | Brand: Seeed Studio

This is HDMI male connector without wire. It exposes all the HDMI wire as bare pins so that you can hack it easily.   Features: Bare connector Easy to hack   Specification: Current rating: 0.5A...

SKU: TB-RR0612 | Brand: Little Bird

A pack of 8 metal film resistors rated at 47 kΩ and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, and are the same physical size as standard ¼W carbon film resistors, ma...

SKU: AF-2230 | Brand: Adafruit

If you have a circuit board or a project you want enclosed, but need something extra durable, this extruded box is absolutely perfect.  It's made from solid anodized aluminum so it's still lightweight while be...

SKU: AF-2192 | Brand: Adafruit

A pack of ten 220µF 16V electrolytic capacitors with long flexible leads, ideal for breadboard and perfboard projects. These capacitors can be used with any DC voltage up to 16V and feature clear labelling on the body...

SKU: AF-2104 | Brand: Adafruit

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles...

SKU: AF-2101 | Brand: Adafruit

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socke...

SKU: AF-2213 | Brand: Adafruit

This 8.000 MHz crystal comes in a standard HC49/US short-style package and is breadboard-friendly for use with any microcontroller or device that requires an external crystal. Two 20 pF load capacitors are included. ...

SKU: AF-2214 | Brand: Adafruit

A 12.000MHz quartz crystal in a standard HC49/US short-style package with two 20pF load capacitors included. The crystal has 30PPM tolerance and 50PPM stability, making it precise enough for USB timing, long-term time...

SKU: PL-2706 | Brand: Pololu

This single-row, 6-pin right-angle female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. The right-angle orientation routes connections parallel to the board surface, making it id...

SKU: PL-2708 | Brand: Pololu

The 0.100″ (2.54 mm) 1×8-Pin Right-Angle Female Header provides a reliable perpendicular connection point for standard 0.1″ pitch male headers. Its right-angle orientation is ideal for low-profile builds or board-edge...

SKU: AF-2270 | Brand: Adafruit

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in...

SKU: PL-2669 | Brand: Pololu

This triple-row, 120-pin (3×40) right-angle male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any triple-row length you nee...

SKU: AF-2378 | Brand: Adafruit

The Arduino Pro Mini is SparkFun's minimal design approach to Arduino.  It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board.  There are no connectors attached -...

SKU: AF-2107 | Brand: Adafruit

The Adafruit USB Isolator provides galvanic isolation between your computer's USB port and connected devices, protecting against harmful noise, ground loops, surges, and voltage spikes. Based on Analog Devices' USB is...