Project Boxes

SKU: DF-FIT0723 | Brand: DFRobot

Protect your electronics projects from rain and water splash with this IP68-rated waterproof enclosure. Made from sturdy ABS with a transparent polycarbonate lid and silicone gasket, it's built for both indoor and out...

SKU: AF-903 | Brand: Adafruit

Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof ga...

SKU: DF-FIT0788-V2 | Brand: DFRobot

##Introduction This is an Aluminum case and heat sink kit built specifically for the Raspberry Pi CM4 IoT Router Carrier Board Mini. The kit allows the Raspberry Pi CM4 IoT Router Carrier Board Mini to be safely house...

SKU: AF-6057 | Brand: Adafruit

SKU: AF-2230 | Brand: Adafruit

If you have a circuit board or a project you want enclosed, but need something extra durable, this extruded box is absolutely perfect.  It's made from solid anodized aluminum so it's still lightweight while be...

SKU: AF-6241 | Brand: Adafruit

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer ...

SKU: DF-FIT0968 | Brand: DFRobot

##Introduction This Expandable case is a high-quality expandable enclosure designed specifically for the LattePanda Sigma Single Board Computer Server. It offers convenient installation for various non-standard M.2 ex...

SKU: DF-FIT0949 | Brand: DFRobot

An all-metal aluminium alloy enclosure designed specifically for the LattePanda Sigma single board computer. Features a bright black anodised finish with sandblasting for a scratch-resistant, professional appearance. ...

SKU: DF-FIT0945 | Brand: DFRobot

##Introduction This meticulously crafted metal enclosure is specifically designed for the LattePanda 3 Delta Single Board Computer. The enclosure fully wraps around the entire LattePanda 3 Delta, including the mainboa...

SKU: DF-FIT0946 | Brand: DFRobot

A fanless aluminium alloy enclosure designed specifically for the LattePanda 3 Delta single board computer. The case acts as a passive heatsink, with the aluminium shell providing excellent thermal conductivity to kee...

SKU: AF-6126 | Brand: Adafruit

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate al...

SKU: AF-6124 | Brand: Adafruit

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves toge...

SKU: AF-6114 | Brand: Adafruit

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and...

SKU: AF-6015 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: AF-6002 | Brand: Adafruit

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simpl...

SKU: AF-5998 | Brand: Adafruit

Here is a cute and minimal enclosure for your Pixel Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button, 3-pin JST SH port, and the 4 ter...

SKU: SF-PRT-22640 | Brand: SparkFun

This metal enclosure finished in SparkFun Red will help protect your electronics from harmful contact from outside sources. The body is one piece of aluminum extrusion which contains mounting slots for your PCBs. The ...

SKU: DF-FIT0724 | Brand: DFRobot

Protect your electronic projects from rain and water splash using this waterproof IP68 enclosure. Made from high-quality ABS material, these boxes are sturdy and terrific for use indoors and outdoors. Each box has a t...

SKU: SF-DEV-13317 | Brand: SparkFun

The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and installed into our Big Red Box. This board features a large prototyping area with exactly ...

SKU: DF-FIT1020 | Brand: DFRobot

This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is m...