Power Management

SKU: AF-5704 | Brand: Adafruit

The Witty Pi 4 is a Raspberry Pi HAT that adds a precision real-time clock, power management, and scheduling capabilities. Define ON/OFF sequences to significantly reduce energy usage in battery-powered systems, or us...

SKU: SF-PRT-28203 | Brand: SparkFun

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH...

SKU: AF-6265 | Brand: Adafruit

This USB C PD to 2.1mm Cable with Selectable Voltage Button will help you get the most out of your USB C Power Delivery wall warts by letting you select any of the available voltages to power a device that expects a 5...

SKU: AF-6349 | Brand: Adafruit

The Adafruit INA238 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...

SKU: AF-6340 | Brand: Adafruit

The Adafruit INA237 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...

SKU: WS-29927 | Brand: Waveshare

Transform your D-Robotics RDK X5 development board into a powerhouse of connectivity and reliability with the latest Power Over Ethernet Expansion Board. Designed to seamlessly integrate with the RDK X5, this PoE modu...

SKU: DF-DFR1095 | Brand: DFRobot

  Introduction The LattePanda Sigma UPS is a reliable and flexible power backup solution designed for the LattePanda Sigma x86 Windows/Linux Single Board Computer Server. It utilizes four 18650 lithium-ion batter...

SKU: DF-DFR1108 | Brand: DFRobot

##Introduction Harness the power of the natural environment with the DFM8001 Ambient Energy Harvesting Module. This module is a micro-energy harvesting module that can be used indoors. It efficiently collects and stor...

SKU: DF-FIT0993 | Brand: DFRobot

This 30cm cable converts a USB Type-C connection into a 5-pin solderless screw terminal block, making it easy to wire power and data to Type-C devices without soldering or custom connectors. All five Type-C pins are b...

SKU: AF-6126 | Brand: Adafruit

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate al...

SKU: AF-6114 | Brand: Adafruit

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and...

SKU: AF-6092 | Brand: Adafruit

The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based charge...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: AF-5991 | Brand: Adafruit

The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...

SKU: AF-5882 | Brand: Adafruit

The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink...

SKU: SF-DEV-21868 | Brand: SparkFun

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...

SKU: SF-COM-21337 | Brand: SparkFun

The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. This full-size, 1in. x 1in. version of our buck regulator bo...

SKU: AF-5436 | Brand: Adafruit

A squishy silicone button module with a built-in PWM controller and colour-changing power indicator. Press to cycle through three power levels — 100%, 70%, and 35% duty cycle — with the illuminated power symbol glowin...

SKU: DF-FIT0884 | Brand: DFRobot

This DC 5.5×2.1mm power splitter cable lets you power two DC devices from a single power source. Each cable splits one female DC jack into two male DC plugs, making it easy to share a power adapter between devices. B...

SKU: AF-5365 | Brand: Adafruit

A 30 cm cable with a standard 4-pin Molex connector, designed to tap into the 5V or 12V DC power rails of an AT or ATX power supply. Perfect for powering electronics projects directly from a desktop PSU. The connecto...