Power Management

SKU: WS-26399 | Brand: Waveshare

Introducing the POE HAT for Raspberry Pi 5: Simplify Connectivity and Power!High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard Power Over Ethernet (PoE) HAT designed for Rasp...

SKU: WS-18014 | Brand: Waveshare

POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan ...

SKU: WS-19694 | Brand: Waveshare

Uninterruptible Power Supply For Pico Keeps Your Pico Running While Recharging, Monitoring Battery Status Via I2C Features At A Glance The Pico-UPS-A is a dedicated UPS (Uninterruptible Power Supply...

SKU: DF-FIT0992 | Brand: DFRobot

This is an uninterruptible power supply (UPS) expansion board specifically designed for Raspberry Pi 5 Single Board Computer. It can be used as a mobile power supply, providing a stable 5V output with a maximum of 5A....

SKU: WS-27670 | Brand: Waveshare

The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5 / CM 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is po...

SKU: WS-25567 | Brand: Waveshare

The UPS HAT (D) is a powerful uninterruptible power supply designed for Raspberry Pi, offering seamless charging and power output with dynamic path management. This HAT provides stable 5V output, ensuring uninterrupte...

SKU: AF-2465 | Brand: Adafruit

The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like A...

SKU: LB-LS6795 | Brand: Little Bird

8-90V to 5V 5A DC-DC Step-Down Converter (25W, USB-C)This compact and efficient DC-DC step-down converter is designed to take an input voltage from 8V to 90V and regulate it down to a stable 5V output at up to 5A (25W...

SKU: AF-261 | Brand: Adafruit

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...

SKU: DF-DFR1015 | Brand: DFRobot

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9...

SKU: LB-LS0221 | Brand: Little Bird

The CJMCU-226 INA226 is a powerful voltage, current, and power monitoring module designed for high precision in both high-side and low-side sensing applications. With its bi-directional current sensing capability and ...

SKU: DF-DFR0123 | Brand: DFRobot

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, th...

SKU: AF-4236 | Brand: Adafruit

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. ...

SKU: DF-DFR0559-1 | Brand: DFRobot

Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and hi...

SKU: SF-PRT-09547 | Brand: SparkFun

A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...

SKU: DF-DFR0753 | Brand: DFRobot

This 40W high power DC-DC Buck converter offers a 6~14V input voltage range and up to 5V/8A output. Featuring a small body, high conversion ratio, strong heat dissipation, and large current output, the module is compa...

SKU: AF-4410 | Brand: Adafruit

The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your bat...

SKU: DF-FIT0080 | Brand: DFRobot

A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...

SKU: LB-LS5508 | Brand: Little Bird

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...

SKU: DF-DFR0831 | Brand: DFRobot

INTRODUCTIONThis is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports make it suitable for connecting multiple devices like, lar...