Power Management

SKU: AF-1400 | Brand: Adafruit

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...

SKU: PL-1145 | Brand: Pololu

This battery holder accommodates 4× AAA batteries in series, providing approximately 6V from alkaline cells or 4.8V from NiMH rechargeables. It features wire leads for connecting to your electronics projects. Key Fea...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery hold...

SKU: AF-259 | Brand: Adafruit

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a precondi...

SKU: TB-MP3312 | Brand: Little Bird

This 12W switchmode plug pack features manually selectable voltage output (3V, 5V, 6V, 7.5V, 9V, or 12V DC) at up to 1000 mA, plus a built-in USB-A output socket for charging or powering USB devices. It comes with 7 i...

SKU: SF-PRT-12900 | Brand: SparkFun

This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with...

SKU: PL-4945 | Brand: Pololu

The Pololu U3V16F12 is a compact switching step-up (boost) voltage regulator that generates a fixed 12V output from input voltages as low as 1.3V (after start-up). It handles continuous input currents up to approximat...

SKU: AF-6323 | Brand: Adafruit

The Adafruit USB Type C CC Resistor Fixer solves a common problem: USB-C devices that won't power or communicate when plugged into another USB-C port. Many devices are missing the two 5.1K CC (Configuration Channel) r...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: AF-5038 | Brand: Adafruit

Witty Pi 3 Mini adds a real-time clock (DS3231SN) and intelligent power management to your Raspberry Pi in a compact bonnet/pHAT form factor. It allows you to schedule startup and shutdown times, define complex ON/OFF...

SKU: DF-SEN0291 | Brand: DFRobot

Gravity: I2C Digital Wattmeter is a high-resolution, high-precision, large-scale measurement module that can measure the voltage, current and power of various electronic modules and electrical equipment within 26V 8A,...

SKU: DF-DFR0568 | Brand: DFRobot

This compact DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 3.3 V output from a wide 2.5–15 V input range. With a maximum output current of 600 mA and ultra-low 180 µA quiescent ...

SKU: AF-1349 | Brand: Adafruit

A really tiny portable inverter for EL wire. Powers off of a single AAA battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (o...

SKU: SF-PRT-13777 | Brand: SparkFun

The SparkFun Battery Babysitter is an all-in-one single-cell Lithium Polymer (LiPo) battery manager. It’s half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project runni...

SKU: PL-1155 | Brand: Pololu

A compact enclosed battery holder for six AA batteries, providing approximately 9V (alkaline) or 7.2V (NiMH rechargeable) from a series configuration. Features bare wire leads for flexible integration into your projec...

SKU: SF-PRT-13032 | Brand: SparkFun

A simple breadboard power supply that takes a 6–12 V input and outputs a regulated 5 V or 3.3 V. All headers are at 0.1" pitch for direct insertion into a standard breadboard, with the output pins spaced to power both...

SKU: DF-FIT0471 | Brand: DFRobot

INTRODUCTION This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small ...

SKU: AF-3456 | Brand: Adafruit

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with...

SKU: PL-2808 | Brand: Pololu

A compact latching power switch with built-in reverse voltage protection. One push turns power on, another push turns it off – providing clean, reliable power control without bulky mechanical switches. This low-volta...

SKU: SF-PRT-18769 | Brand: SparkFun

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...