Power Management

SKU: LB-LS4126-LS1558 | Brand: Little Bird

FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged S...

SKU: LB-LS3337 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Thre...

SKU: DF-DFR0580 | Brand: DFRobot

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. This...

SKU: AF-4711 | Brand: Adafruit

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...

SKU: AF-1400 | Brand: Adafruit

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...

SKU: PL-1145 | Brand: Pololu

This battery holder accommodates 4× AAA batteries in series, providing approximately 6V from alkaline cells or 4.8V from NiMH rechargeables. It features wire leads for connecting to your electronics projects. Key Fea...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder takes three AA cells and provides a simple way to power compatible Arduino-style boards via a Micro USB connection.Use it with NiMH or NiCd rechargeable cells for a 3.6V battery pack, or with alkal...

SKU: AF-259 | Brand: Adafruit

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a precondi...

SKU: TB-MP3312 | Brand: Little Bird

This 12W switchmode plug pack features manually selectable voltage output (3V, 5V, 6V, 7.5V, 9V, or 12V DC) at up to 1000 mA, plus a built-in USB-A output socket for charging or powering USB devices. It comes with 7 i...

SKU: SF-PRT-12900 | Brand: SparkFun

This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with...

SKU: PL-4945 | Brand: Pololu

The Pololu U3V16F12 is a compact switching step-up (boost) voltage regulator that generates a fixed 12V output from input voltages as low as 1.3V (after start-up). It handles continuous input currents up to approximat...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: AF-5038 | Brand: Adafruit

Witty Pi 3 Mini adds a real-time clock (DS3231SN) and intelligent power management to your Raspberry Pi in a compact bonnet/pHAT form factor. It allows you to schedule startup and shutdown times, define complex ON/OFF...

SKU: DF-DFR0568 | Brand: DFRobot

This compact DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 3.3 V output from a wide 2.5–15 V input range. With a maximum output current of 600 mA and ultra-low 180 µA quiescent ...

SKU: SF-PRT-13777 | Brand: SparkFun

The SparkFun Battery Babysitter is an all-in-one single-cell Lithium Polymer (LiPo) battery manager. It’s half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project runni...

SKU: SF-PRT-13032 | Brand: SparkFun

A simple breadboard power supply that takes a 6–12 V input and outputs a regulated 5 V or 3.3 V. All headers are at 0.1" pitch for direct insertion into a standard breadboard, with the output pins spaced to power both...

SKU: DF-FIT0471 | Brand: DFRobot

INTRODUCTION This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small ...

SKU: AF-3456 | Brand: Adafruit

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with...

SKU: SF-PRT-18769 | Brand: SparkFun

This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...

SKU: DF-FIT0626 | Brand: DFRobot

This battery holder connects 3× AAA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector, making it compatible with DFRobot boards and other devices that use the PH2....