Power & Batteries

SKU: AF-1400 | Brand: Adafruit

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...

SKU: AF-2165 | Brand: Adafruit

A popular low-dropout (LDO) 3.3 V linear voltage regulator based on the LD1117 in a TO-220 package. With approximately 1 V dropout and up to 800 mA output current, it cleanly steps down 5–15 V supplies to a regulated ...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder takes three AA cells and provides a simple way to power compatible Arduino-style boards via a Micro USB connection.Use it with NiMH or NiCd rechargeable cells for a 3.6V battery pack, or with alkal...

SKU: SF-CAB-13244 | Brand: SparkFun

A short 150 mm (6″) USB 2.0 Type-A to Micro-B cable, ideal for connecting development boards, chargers, and other devices within compact enclosures where a full-length cable isn't needed. Specifications Connector A...

SKU: AF-259 | Brand: Adafruit

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a precondi...

SKU: SF-PRT-12900 | Brand: SparkFun

This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with...

SKU: AF-736 | Brand: Adafruit

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no l...

SKU: SF-PRT-09518 | Brand: SparkFun

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering...

SKU: LB-12V3A | Brand: Little Bird

A regulated 12V 3A (36W) switching power supply that comes with multiple interchangeable DC plug adapters for compatibility with a wide range of 12V devices. Suitable for powering routers, LED strips, single-board com...

SKU: AF-6323 | Brand: Adafruit

The Adafruit USB Type C CC Resistor Fixer solves a common problem: USB-C devices that won't power or communicate when plugged into another USB-C port. Many devices are missing the two 5.1K CC (Configuration Channel) r...

SKU: SF-CAB-24507 | Brand: SparkFun

A short 300mm USB Type-A to Micro-B cable for programming and powering the BBC micro:bit. Supports USB 2.0 data transfer at up to 480Mb/s. Green colour makes it easy to identify at a glance on a busy desk or in a clas...

SKU: AF-5757 | Brand: Adafruit

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: SF-COM-21255 | Brand: SparkFun

The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc., a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40m...

SKU: DF-DFR1026 | Brand: DFRobot

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...

SKU: LB-LS4548 | Brand: Little Bird

A standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a good pair for a...

SKU: AF-5523 | Brand: Adafruit

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into ...

SKU: AF-5612 | Brand: Adafruit

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your...

SKU: AF-5457 | Brand: Adafruit

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it will give you a higher DC voltage! It's a handy way to power...

SKU: AF-5329 | Brand: Adafruit

If your computer has a USB A port still, and you want a small, cable-less way to connect our modern USB C devices, this little dongle will do the job nicely. It's quite simple - you've got your USB A plug on one side,...