Power & Batteries

SKU: DF-DFR0579 | Brand: DFRobot

The Solar Power Manager Micro is an ultra-low-power solar energy management module designed for 1–3 V small solar panels. Built around the SPV1050 IC with MPPT (Maximum Power Point Tracking), it maximises solar conver...

SKU: AF-1400 | Brand: Adafruit

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...

SKU: AF-2165 | Brand: Adafruit

A popular low-dropout (LDO) 3.3 V linear voltage regulator based on the LD1117 in a TO-220 package. With approximately 1 V dropout and up to 800 mA output current, it cleanly steps down 5–15 V supplies to a regulated ...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder takes three AA cells and provides a simple way to power compatible Arduino-style boards via a Micro USB connection.Use it with NiMH or NiCd rechargeable cells for a 3.6V battery pack, or with alkal...

SKU: SF-CAB-13244 | Brand: SparkFun

A short 150 mm (6″) USB 2.0 Type-A to Micro-B cable, ideal for connecting development boards, chargers, and other devices within compact enclosures where a full-length cable isn't needed. Specifications Connector A...

SKU: AF-259 | Brand: Adafruit

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a precondi...

SKU: SF-PRT-12900 | Brand: SparkFun

This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with...

SKU: AF-736 | Brand: Adafruit

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no l...

SKU: SF-PRT-09518 | Brand: SparkFun

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering...

SKU: LB-LR0309-18 | Brand: Little Bird

A single-cell 18650 battery holder with bare wire leads, designed for easy integration of 18650 lithium-ion cells into your electronics projects. Simply drop in a battery and connect the leads — no soldering or connec...

SKU: LB-12V3A | Brand: Little Bird

A regulated 12V 3A (36W) switching power supply that comes with multiple interchangeable DC plug adapters for compatibility with a wide range of 12V devices. Suitable for powering routers, LED strips, single-board com...

SKU: AF-6268 | Brand: Adafruit

This USB Type C Sync Data Cable with On/Off Switch cable is great when you don't want to plug-and-unplug a device to turn it on and off. It's a true USB C to C cable, with power, data and power delivery (USB C PD) lin...

SKU: AF-6323 | Brand: Adafruit

The Adafruit USB Type C CC Resistor Fixer solves a common problem: USB-C devices that won't power or communicate when plugged into another USB-C port. Many devices are missing the two 5.1K CC (Configuration Channel) r...

SKU: LB-LS1485 | Brand: Little Bird

A compact 213 × 92 mm solar panel with a 12V nominal output and 2.5W power rating (approximately 208mA). Suitable for trickle-charging 12V batteries, powering small outdoor sensors, and solar-powered electronics proje...

SKU: SF-CAB-24507 | Brand: SparkFun

A short 300mm USB Type-A to Micro-B cable for programming and powering the BBC micro:bit. Supports USB 2.0 data transfer at up to 480Mb/s. Green colour makes it easy to identify at a glance on a busy desk or in a clas...

SKU: AF-5757 | Brand: Adafruit

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: DF-DFR1026 | Brand: DFRobot

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...

SKU: LB-LS4548 | Brand: Little Bird

A standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a good pair for a...

SKU: AF-5523 | Brand: Adafruit

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into ...