Power & Batteries

SKU: RP-SC0749 | Brand: Raspberry Pi Ltd

The official power supply for the Raspberry Pi Build HAT. This 48W adapter provides sufficient power to run both your Raspberry Pi and connected LEGO® Technic™ motors and sensors through the Build HAT's barrel jack co...

SKU: RP-SC1677 | Brand: Raspberry Pi Ltd

Many of our favourite Raspberry Pi applications, from garden webcams to industrial controllers, involve putting our products in out-of-the-way locations, where they act as a bridge between the network and the physical...

SKU: SF-PRT-21870 | Brand: SparkFun

A simple plug and play USB C to A converter (and vice-versa). This allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Type C port. It features up to USB 3.1 s...

SKU: SF-CAB-21275 | Brand: SparkFun

This is the 6.5ft version of the Fast Charging USB C to C cable. Charging or powering your USB Type C device can be daunting and finding a cable that fits both your interface and provides safe power levels is a new...

SKU: ET-2815910 | Brand: Little Bird

An Australian-certified 30W power supply for the NVIDIA Jetson development kits. Delivers 5V at 6A, providing enough power to run your Jetson at full performance without throttling. Specifications Output Voltage – ...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: DF-FIT0151 | Brand: DFRobot

A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, ci...

SKU: SF-PRT-10811 | Brand: SparkFun

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and...

SKU: SF-PRT-10288 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack an...

SKU: LB-C-25 | Brand: Little Bird

A compact 25cm USB-A to USB-C cable for charging and data transfer. The short length keeps your desk tidy, reduces cable clutter, and is perfect for portable power banks or tight workspaces. Key Features 25cm Lengt...

SKU: LB-CTOB-UNO | Brand: Little Bird

This USB-C to USB-B cable connects your Arduino Uno (and other USB-B devices) to modern laptops and computers equipped with USB-C ports. At 1 metre long, it provides a convenient length for desktop programming and pro...

SKU: AF-5449 | Brand: Adafruit

A USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a 9V DC barrel jack output at up to 5A. The built-in PD sink negotiation chip communicates with your adapter to request 9V o...

SKU: SF-CAB-19717 | Brand: SparkFun

A USB-C to USB-C cable with a built-in LCD display that shows real-time power draw — so you can see exactly how much power your device is pulling. Supports up to 100W USB PD (Power Delivery) at 5A, with USB 2.0 data t...

SKU: AF-4052 | Brand: Adafruit

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB...

SKU: LB-LR0335-LB | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant light blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow s...

SKU: SF-TOL-08639 | Brand: SparkFun

A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications ...

SKU: TB-XC4502 | Brand: Little Bird

This compact TP4056-based module charges a single lithium cell from a 5V USB supply. With charge state LEDs and both mini-USB and solder tab inputs, it's an easy way to add rechargeable battery capability to your proj...

SKU: AF-369 | Brand: Adafruit

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The termi...

SKU: AF-449 | Brand: Adafruit

This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...

SKU: LB-1147 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides a...