Pololu

SKU: PL-855 | Brand: Pololu

A 2×3-pin (6-pin) IDC socket with strain relief clip, designed for use with standard 2×3-pin shrouded male headers. Crimps onto flat ribbon cable for quick, solderless connections. Commonly used for AVR ISP programmin...

SKU: PL-1957 | Brand: Pololu

This #2-56, pan-head screw is 7/16″ long (0.4375″). It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-727 | Brand: Pololu

The Pololu Serial 8-Servo Controller lets you control up to eight RC servos from almost any robot controller, microcontroller, or computer with a serial port. It accepts standard RS-232 or TTL-level serial signals wit...

SKU: PL-799 | Brand: Pololu

Overview The Pololu adjustable boost regulator is a very flexible switching regulator (also called a switched-mode power supply, SMPS, or DC-to-DC converter) that can generate voltages higher than its input volta...

SKU: PL-602 | Brand: Pololu

The Solarbotics GMB28 is a precision laser-cut steel mounting bracket designed for the Solarbotics GM2 and GM8 gear motors. It provides a sturdy, versatile mounting solution for attaching these motors to robot chassis...

SKU: PL-1798 | Brand: Pololu

A 30 cm (12-inch) adapter cable with a 3-pin female JST PH-style connector on one end and individual female pins for 0.1" housings on the other. Designed to connect Sharp analog distance sensors to breadboards, microc...

SKU: PL-2990 | Brand: Pololu

Overview DRV8838 Single Brushed DC Motor Driver Carrier, bottom view with dimensions. TI SN754410 (16-pin DIP) next to the #2135 DRV8835 carrier (14-pin DIP) and #2990 DRV8838 carrier (10-pin DIP) for size re...

SKU: PL-2535 | Brand: Pololu

A pack of 10 addressable RGB LEDs in a familiar 5mm through-hole form factor. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just one microcontroller ...

SKU: PL-3753 | Brand: Pololu

The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO...

SKU: PL-4760 | Brand: Pololu

This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors and cables are not...

SKU: PL-4763 | Brand: Pololu

A 300mm (12″) cable with a female JST SH-style connector on one end and six unterminated colour-coded 28 AWG wires on the other. Designed for use with Pololu Micro Metal Gearmotor Encoders (both top-entry and side-ent...

SKU: PL-4453 | Brand: Pololu

The QTRX-MD-13A is a 13-channel reflectance sensor array designed for line-following robots and reflectance detection applications. It uses high-performance QTRX sensor modules with lenses, providing strong performanc...

SKU: PL-3581 | Brand: Pololu

The RoboClaws from Basicmicro (formerly Ion Motion Control) are a family of efficient, versatile, synchronous regenerative motor controllers. They can supply brushed DC motors with 7.5 A, 15 A, 30 A, 45 A, 60 A, or 12...

SKU: PL-3435 | Brand: Pololu

This plastic mounting bracket is designed for use with standard-size servos like the Power HD AR-3606HB continuous rotation servo and the FEETECH FS5103B standard servo. By clasping around the servo and capturing its ...

SKU: PR-PIM056 | Brand: Little Bird

The regal purple Coupé Royale case for Raspberry Pi A+. Pibow Coupé is a slim, hackable and attractive case crafted from three unique layers with a transparent top and base that leave your Pi visible inside. Each lay...

SKU: PL-2536 | Brand: Pololu

A pack of 10 addressable RGB LEDs in a larger 8 mm through-hole form factor with diffused lenses. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just ...