Pololu

SKU: PL-3712 | Brand: Pololu

A compact 6V brushed DC gearmotor with long-life carbon brushes and a 25:1 metal spur gearbox. This version includes an extended 6 × 2mm motor shaft at the rear, useful for attaching encoder wheels or other feedback m...

SKU: PL-2698 | Brand: Pololu

M3 Phillips head machine screws, 16 mm long. A common fastener size used in electronics enclosures, 3D printer assemblies, robotics builds, and general prototyping. Sold in a pack of 25. Specifications Thread Size:...

SKU: PL-2508 | Brand: Pololu

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into ...

SKU: PL-1587 | Brand: Pololu

A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearb...

SKU: PL-1576 | Brand: Pololu

A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gear...

SKU: PL-2481 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...

SKU: PL-2454 | Brand: Pololu

The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for e...

SKU: PL-1410 | Brand: Pololu

This 0.036″-thick stainless steel plate can be mounted to the front of the Zumo chassis to create a slanted, bulldozer-like blade for pushing around objects, such as other mini-sumo robots.

SKU: PL-2267 | Brand: Pololu

A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to t...

SKU: PL-1268 | Brand: Pololu

The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...

SKU: PL-1265 | Brand: Pololu

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...

SKU: PL-1245 | Brand: Pololu

The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...

SKU: PL-1239 | Brand: Pololu

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...

SKU: PL-1242 | Brand: Pololu

The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a si...

SKU: PL-2179 | Brand: Pololu

This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that ...

SKU: PL-1120 | Brand: Pololu

A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the r...

SKU: PL-1100 | Brand: Pololu

A Pololu micro metal gearmotor with a 5:1 gear ratio and low-power (LP) 6V motor. The LP motor variant uses precious metal brushes and draws the least current of the micro metal gearmotor family, making it well-suited...

SKU: PL-1070 | Brand: Pololu

This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.

SKU: PL-1069 | Brand: Pololu

This M3 hex nut is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1071 | Brand: Pololu

This is a basic, general-purpose green LED in a standard T1 (3mm) package with 0.1" lead spacing.