Pololu

SKU: PL-351 | Brand: Pololu

A 400-point solderless breadboard for prototyping electronic circuits. Features 30 rows of tie points with four bus lines spanning the full length of the board, providing enough space for up to four 14-pin DIP ICs or ...

SKU: PL-1406 | Brand: Pololu

This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.

SKU: PL-352 | Brand: Pololu

This full-size 830-point solderless breadboard provides 63 rows of tie points with four bus lines spanning the full length of the board. It accommodates up to nine 14-pin DIP ICs or seven 16-pin DIP ICs, and labelled ...

SKU: PL-1152 | Brand: Pololu

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with thr...

SKU: PL-2858 | Brand: Pololu

The D24V22Fx family of step-down voltage regulators generates lower output voltages from input voltages as high as 36 V. They are synchronous switching regulators (also called switched-mode power supplies (SMPS) or DC...

SKU: PL-1928 | Brand: Pololu

This crimping tool can be used to crimp both male and female versions of our Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST RCY connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp p...

SKU: PL-1089 | Brand: Pololu

This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy install...

SKU: PL-954 | Brand: Pololu

This light ball caster uses a 3/4″ diameter plastic ball. The height of the assembled kit ranges from 0.9″ to 1.2″, depending on the combination of included spacers used. Included dowel pins can be used to reduce the...

SKU: PL-1912 | Brand: Pololu

These 2×4-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable eight-wire co...

SKU: PL-1166 | Brand: Pololu

These 0.1 μF 100 V ceramic capacitors have many uses, including noise suppression on motors.

SKU: PL-1145 | Brand: Pololu

This battery holder accommodates 4× AAA batteries in series, providing approximately 6V from alkaline cells or 4.8V from NiMH rechargeables. It features wire leads for connecting to your electronics projects. Key Fea...

SKU: PL-2128 | Brand: Pololu

The Black Edition of the A4988 stepper motor driver carrier features a four-layer PCB for better thermal performance, allowing the A4988 to deliver approximately 20% more current than the standard two-layer (green) ve...

SKU: PL-4945 | Brand: Pololu

The Pololu U3V16F12 is a compact switching step-up (boost) voltage regulator that generates a fixed 12V output from input voltages as low as 1.3V (after start-up). It handles continuous input currents up to approximat...

SKU: PL-4035 | Brand: Pololu

This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 2.1 A (6 A peak) to a single bidirectional brushed DC motor. The DRV887...

SKU: PL-2485 | Brand: Pololu

The Pololu Basic 2-Channel SPDT Relay Carrier provides simple, independent control of two single-pole, double-throw (SPDT) relay switches from low-voltage, low-current control signals. This assembled version comes rea...

SKU: PL-1490 | Brand: Pololu

A compact 170-point solderless breadboard in classic white, perfect for small circuits and prototyping with DIP ICs. The 17-row layout accommodates up to two 14- or 16-pin DIP packages, making it ideal for quick test ...

SKU: PL-1403 | Brand: Pololu

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae...

SKU: PL-1336 | Brand: Pololu

The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the hea...

SKU: PL-1155 | Brand: Pololu

A compact enclosed battery holder for six AA batteries, providing approximately 9V (alkaline) or 7.2V (NiMH rechargeable) from a series configuration. Features bare wire leads for flexible integration into your projec...

SKU: PL-1076 | Brand: Pololu

This M3, pan-head screw is 8 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.