Pimoroni

SKU: PI-RPI-010 | Brand: Pimoroni

This kit comes with super handy adaptors for the mini-HDMI and micro-B USB On-The-Go ports for your new Raspberry Pi Zero! You'll need these adaptors to connect your Raspberry Pi Zero to normal HDMI screens and USB...

SKU: PI-CAB0003 | Brand: Pimoroni

Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of jerk...

SKU: PI-CAB0002 | Brand: Pimoroni

Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of j...

SKU: PI-CAB0001 | Brand: Pimoroni

Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboard or in any situation where space is at a premium. Each strip of j...

SKU: PI-COM1111 | Brand: Pimoroni

Colour-coded GPIO pins that make locating that ground or power connection you need super simple! These 40-pin 2x20 male headers from our friends at The Pi Hut can be used on a Raspberry Pi Zero and are colour-coded...

SKU: PR-PIM357 | Brand: Little Bird

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor en...

SKU: PI-CAB0004 | Brand: Pimoroni

Rainbow coloured jumper strips, perfect for use with our mini breadboards! Each strip of jerky contains 40 individual jumper leads, 185mm long, which are easily separated into multiples of your choice if needed. I...

SKU: PI-CAM008 | Brand: Pimoroni

Light up the night with this night vision camera module with infra-red LEDs, for Raspberry Pi! Available with ether a standard (70°) or a wide-angle (160°) lens, this camera has IR LEDs that allow the ...

SKU: PI-COM0415 | Brand: Pimoroni

The rocker switch is a classic and this one is a great size for an unobtrusive on/off switch.It can be panel mounted and has two tabs for connecting wire. You can either solder wire or use a quick-connect connector.

SKU: PR-PIM580 | Brand: Little Bird

The Pico Display Pack 2.0 is a 2.0" IPS LCD add-on that attaches to the back of your Raspberry Pi Pico. With an 18-bit capable 320×240 pixel display, four tactile buttons, and an RGB LED, it turns your Pico into a com...

SKU: PI-CAB0307 | Brand: Pimoroni

This 20 cm flat-flex cable (FFC) connects the Raspberry Pi Camera Module to the CSI port on your Raspberry Pi. A shorter cable is useful for compact builds, enclosures, and projects where the standard 15 cm cable is t...

SKU: PR-PIM551 | Brand: Little Bird

Scoring very highly in the Pimoroni "things on our desk that make people say ooo" rankings, RGB Keypad Base equips a Pico with an eye-catching 4x4 silicone keypad, fully loaded with addressable APA102 LEDs so that ...

SKU: PR-PIM183 | Brand: Little Bird

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right ...

SKU: PI-PIM725 | Brand: Pimoroni

The Pimoroni Presto is an RP2350-powered desktop companion featuring a 4" square touchscreen IPS display, elegant black aluminium stand, and RGB backlighting. Fully programmable with MicroPython or C/C++, it's designe...

SKU: PR-PIM365 | Brand: Little Bird

A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Ardu...

SKU: PR-PIM373 | Brand: Little Bird

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for p...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: PR-PIM485 | Brand: Little Bird

Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a ...

SKU: PR-PIM773 | Brand: Pimoroni

Our Inky Impression E Ink® displays are super crisp, low power and look great from a variety of viewing angles. They have high pixel density and bright vivid colours, perfect for showing off gorgeous dithered images ...

SKU: PI-PIM726 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with all the goodies - 16MB of flash, 8MB of PSRAM, USB-C, Qw/ST and 2.4GHz wireless / Bluetooth.We adore the versatility and value of Raspberry Pi Pico but we als...