Gravity: Expansion Board for Raspberry Pi Pico
We have ✅ 5 available of the DF-DFR0848 in our Sydney warehouse. An extra 207 units will be available shortly.
Note: The product not inclueded Raspberry Pi Pico.
This Gravity Expansion Board, specifically designed for Raspberry Pi Pico, is compatible with a variety of Gravity sensors and modules.
With all pins led out, you can directly use it without soldering. Additionally, the board offers various communication ports including, 2 x I2C, 2 x UART, 2 x SPI, 3 x analog IOs and 13 x digital IOs as well as a 3.3~5.5V power connector and GDI port, which provides you with an easier way to prototype.
FEATURES
FEATURES
No need to weld, plug-and-play
Support all kinds of Gravity sensor and modules
Comes with 3.3~5.5 V PH2.0 power interface, applicable to mobile projects
Onboard GDI port, compatible with DFRobot - GDI series display
SPECIFICATION
All pins brought out onto female pin headers
Digital IO x 13: GP2, GP3, GP12-22
Analog IO x 3: GP26-GP28
UART x 2
I2C x 2
SPI x 2
PH2.0 Power Connector: 3.3 V - 5.5 V
Display Screen Interface: GDI
Dimension: 73.00x63.00 mm/28.74x24.8 inch
DOCUMENTS
SHIPPING LIST
Gravity: Expansion Board for Raspberry Pi Pico x 1
**** NOTE *****
The pin mapping for the headers on the left of the board, specifically the Digital and Analog sections, are flipped/reversed. So GP2 - GP22 on the green pins of this board are mapped to GP22 - GP2 on the Pico itself. Likewise, GP26 - GP28 on the blue pins are mapped to GP28 - GP26 on the Pico.
**** NOTE *****
The pin mapping for the headers on the left of the board, specifically the Digital and Analog sections, are flipped/reversed. So GP2 - GP22 on the green pins of this board are mapped to GP22 - GP2 on the Pico itself. Likewise, GP26 - GP28 on the blue pins are mapped to GP28 - GP26 on the Pico.
The Gravity: Expansion Board for Raspberry Pi Pico appears in the following collections:
SKU DF-DFR0848
by Little Bird
