Physical Buttons & Switches

SKU: AF-3487 | Brand: Adafruit

This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or dire...

SKU: AF-5662 | Brand: Adafruit

A 10-pack of two-part relegendable keycaps in black, compatible with Cherry MX and MX-compatible key switches. Each keycap has a black base and a clear snap-on cover — simply slip a sticker, label, or piece of paper u...

SKU: LB-LS3381-G | Brand: Little Bird

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in green, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features ...

SKU: LB-LS3381-Y | Brand: Little Bird

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features ...

SKU: LB-LR0589-WHITE | Brand: Little Bird

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in white. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the pan...

SKU: PI-COM0404 | Brand: Pimoroni

A colourful 30 mm arcade-style pushbutton in blue. With a satisfying 2 mm travel and tactile click, these buttons are ideal for arcade builds, control panels, and interactive projects. Key Features Arcade Style – C...

SKU: AF-1443 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired ...

SKU: AF-1444 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired...

SKU: DF-FIT0129 | Brand: DFRobot

The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.

SKU: AF-419 | Brand: Adafruit

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the...

SKU: AF-3491 | Brand: Adafruit

This 30mm translucent clear arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or dire...

SKU: AF-5114 | Brand: Adafruit

For crafting your very own custom keyboard, these Kailh Choc Low Profile Clicky White mechanical key switches are super slim, with ultra-low profile compared to MX compatible switches!Please note these ...

SKU: LB-LR0589-YELLOW | Brand: Little Bird

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the pa...

SKU: LB-LR0589-BLUE | Brand: Little Bird

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in blue. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the pane...

SKU: DF-SEN0387 | Brand: DFRobot

This magnetic switch consists of two parts: a reed switch sensor with cable and a magnet trigger in a plastic housing. When the magnet is brought within approximately 1 cm of the sensor, the reed switch closes, allowi...

SKU: LB-00099 | Brand: Little Bird

The Cherry MX Clear switch is a medium stiff, tactile, non-clicky mechanical keyboard switch in the Cherry MX family. The slider is not actually clear but colourless (in effect, translucent white). The word Clear i...

SKU: AF-1010 | Brand: Adafruit

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) a...

SKU: AF-1190 | Brand: Adafruit

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...

SKU: PI-COM0408 | Brand: Pimoroni

Classic arcade buttons in a variety of colours.Ever feel the need to relive the glory days of button mashing in your local arcade?Or possibly you just need to add a button to your project and want something a little m...

SKU: PI-COM0407 | Brand: Pimoroni

A classic arcade-style push button in yellow with a satisfying 2 mm travel and tactile click. Adds a splash of colour and a solid feel to custom controllers, interactive projects, and maker builds. Key Features Arc...