Physical Buttons & Switches

SKU: AF-1092 | Brand: Adafruit

A tactile push on/push off switch with pre-attached wire leads. Squeeze once to turn on, squeeze again to turn off — a satisfying click-action toggle that's easy to embed in seams and fabric for wearable projects, or ...

SKU: PI-COM0424 | Brand: Pimoroni

A 16mm yellow/orange illuminated momentary button that's ideal as a power button for our Picade X HAT, or just for situations when you need a small illuminated button. Features Momentary switch Yellow/orange ...

SKU: TB-SK0970 | Brand: Little Bird

Push-on, clear plastic cap for mini rocker switches.Suits switches SK-0984, SK-0985, SK-0987. Specifications Switch Type Switch Cover ...

SKU: PI-COM0423 | Brand: Pimoroni

Classic arcade buttons in a variety of colours.Ever feel the need to relive the glory days of button mashing in your local arcade?Or possibly you just need to add a button to your project and want something a little m...

SKU: AF-1333 | Brand: Adafruit

This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so we can think of a lot of wearable and portable projects that would use this so...

SKU: AF-916 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water ou...

SKU: AF-558 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep wat...

SKU: AF-559 | Brand: Adafruit

A chrome-plated metal pushbutton with an illuminated red LED ring, designed for panel mounting in a 16 mm hole. The weatherproof design includes a rubber gasket to seal the enclosure against water ingress, making it s...

SKU: AF-482 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water ou...

SKU: AF-3938 | Brand: Adafruit

The NeoTrellis M4 Mainboard combines an ATSAMD51 Cortex M4 processor, a 4×8 grid of NeoPixel-lit elastomer button pads, stereo audio output, microphone input, and a triple-axis accelerometer into one compact, programm...

SKU: TB-ST0505 | Brand: Little Bird

A miniature 3PDT (3-pole, double-throw) toggle switch for panel-mount applications. With three independent switching circuits, this switch can control multiple signals simultaneously — commonly used in guitar effect p...

SKU: AF-1611 | Brand: Adafruit

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, provid...

SKU: SF-COM-11813 | Brand: SparkFun

Have you ever been listening to music on your MP3 player and a song you don’t want to listen to comes on but you don’t want to reach into your bag to change the track? The 5 Button Fabric Button Pad, from Sensing Tex,...

SKU: SF-COM-08236 | Brand: SparkFun

This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...

SKU: AF-1685 | Brand: Adafruit

A push-button toggle switch with three wire leads. Each press alternates the connection — push once to connect the middle pin to one side, push again to switch it to the other. It functions as a simple, satisfying mec...

SKU: AF-1867 | Brand: Adafruit

A breakout board with a CR1220 coin cell battery holder, an on/off switch, and 0.1″ pitch breakout pins. Ideal for powering very low-current projects or providing switchable battery backup for a real-time clock (RTC) ...

SKU: DF-FIT0115-B | Brand: DFRobot

A rugged, waterproof illuminated pushbutton designed for panel-mount applications. Built from stainless steel, this momentary switch features a blue LED ring that provides clear visual feedback, making it easy to iden...

SKU: DF-FIT0115-G | Brand: DFRobot

A waterproof stainless steel momentary pushbutton with a built-in green LED ring illuminator. Rated IP67 for dust-tight and water-resistant operation, this rugged button is ideal for panel-mount applications in both i...

SKU: DF-FIT0115-R | Brand: DFRobot

This is a water proof push button with illuminator (LED). It is made by stainless steel with excellent quality. It comes at red illuminated ring. SPECIFICATIONS Model:LAS1-AGQ 19 Diameter ...

SKU: AF-2808 | Brand: Adafruit

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose yo...