New Arrivals

SKU: DF-FIT0428 | Brand: DFRobot

The ECell Breadboard-Plugin Connector is a reusable adapter that lets you plug common components neatly into a solderless breadboard. Gold-plated 0.64 mm pins perfectly match standard breadboard tie-points for reliabl...

SKU: SF-ROB-12629 | Brand: SparkFun

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing relia...

SKU: DF-FIT0424 | Brand: DFRobot

The ECell Breadboard-Plugin Capacitor pack provides common capacitor values in a breadboard-friendly module format. Each capacitor is mounted on a small PCB with gold-plated pins that plug directly into standard bread...

SKU: LB-PRT-12618 | Brand: Little Bird

An enclosed coin cell battery holder for two CR2032 batteries wired in series, delivering up to 6 V output. The holder features a built-in on/off slide switch and two 150 mm (6″) power leads (positive and negative). A...

SKU: AF-1824 | Brand: Adafruit

This phone-style 3×4 matrix keypad features 12 buttons (0–9, *, #) with telephone-layout lettering printed on the keys. It uses a matrix scanning arrangement requiring only 7 microcontroller pins (3 columns + 4 rows) ...

SKU: DF-DFR0356 | Brand: DFRobot

INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity inter...

SKU: SF-PRT-10114 | Brand: SparkFun

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snug...

SKU: AF-1922 | Brand: Adafruit

A 10-segment LED bar graph display in bright yellow. Similar to the amber version but a bit brighter with more yellow. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining cle...

SKU: AF-716 | Brand: Adafruit

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and k...

SKU: DF-DFR0375 | Brand: DFRobot

INTRODUCTION The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to pre...

SKU: DF-DFR0423 | Brand: DFRobot

INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and...

SKU: SF-COM-10079 | Brand: SparkFun

RTC stands for real time clock folks. The DS3234 is a low-cost, extremely accurate SPI bus RTC with an integrated temperature compensated crystal oscillator (TCXO) and crystal.

SKU: SF-COM-10049 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red and yellow LEDs (10 of each) all conveniently packaged in a nice reusable ESD safe bag. Includes: 10...

SKU: DF-DFR0445 | Brand: DFRobot

RPLIDAR A2 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 4000 samples of laser ranging per second with high rotation speed. And equipped with S...

SKU: DF-FIT0475 | Brand: DFRobot

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card, GPIO and anten...

SKU: AF-1937 | Brand: Adafruit

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your raspberry pi but was still small enough...

SKU: SF-SEN-12589 | Brand: SparkFun

The SparkFun RedBot Accelerometer is an add-on sensor that provides bump and motion detection for the RedBot platform. It measures acceleration forces on the X, Y, and Z axes using the MMA8452Q triple-axis acceleromet...

SKU: SF-SEN-09963 | Brand: SparkFun

The SparkFun RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your ...

SKU: SF-BOB-09966 | Brand: SparkFun

A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregu...

SKU: AF-196 | Brand: Adafruit

The Proto-ScrewShield is a dual-purpose Arduino prototyping shield that combines a large through-hole prototyping area with screw terminal breakouts for every Arduino pin. Instead of soldering wires directly, you get ...