Microcontrollers

SKU: EC-DPO01117E | Brand: Elecrow

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate ...

SKU: LB-EAGLED-BUZZ-KIT | Brand: Little Bird

The EagLED is Little Bird Electronics' own Arduino-compatible wearable development kit, designed from the ground up for e-textile projects. It packs a microcontroller, LEDs, light sensor, push button, and buzzer onto ...

SKU: EC-MCA03168A | Brand: Elecrow

The Nano 168 is a compact, breadboard-friendly Arduino-compatible development board based on the ATmega168 microcontroller. It offers the same functionality as the Arduino Nano in a small DIP form factor, with 14 digi...

SKU: LB-TINY | Brand: Little Bird

The CJMCU card is a small microcontroller based on the ATTiny85 chipset. It is perfect for wearable projects. Also widely used in electronic projects due to its compatibility with the Arduino IDE, bringing an ATtiny85...

SKU: AF-2927 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 ...

SKU: AF-3178 | Brand: Adafruit

The Feather M0 RFM95 LoRa Radio (900 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The exact frequency is s...

SKU: DF-DFR1154 | Brand: DFRobot

An intelligent AI camera module built around the ESP32-S3 chip, combining a 160° wide-angle infrared camera, onboard microphone, speaker, and powerful edge AI capabilities. Designed for video processing, image recogni...

SKU: PI-PIM715 | Brand: Pimoroni

An expanded 2.8" (320 x 240 pixel) IPS LCD display add on for Raspberry Pi Pico / Pico W, with four buttons, an RGB LED and Qw/ST connectivity.Pico Display 2.8" features a bold, credit-card sized 320 x 240 pixel LCD d...

SKU: WS-26379 | Brand: Waveshare

Introducing the PICO-CAM-A: RP2040 Camera Development Board Unlock the potential of image information capture with our PICO-CAM-A, a cost-effective, high-performance MCU camera board based on the Raspberry Pi RP2...

SKU: EF-EF08278 | Brand: ElecFreaks

Raspberry Pi Pico Starter Kit is an electronic starter kit that is designed for Raspberry Pico. The kit provides some basic electronic components such as LEDs, buttons, and photo-diode, it helps you enter a wonderful ...

SKU: KI-5331 | Brand: Kitronik

This board allows the Raspberry Pi Pico (connected via pin header) to drive two motors simultaneously with full forward, reverse & stop control, making it ideal for Pico controlled buggy projects. Alternatively, the b...

SKU: SF-WRL-19177 | Brand: SparkFun

The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of application...

SKU: SF-DEV-19426 | Brand: SparkFun

The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-en...

SKU: DF-DFR0816 | Brand: DFRobot

Beetle CM-32U4 is a micro Leonardo controller with an onboard charging chip. As an upgraded version of the DFRobot Beetle Board, this board is greatly optimized in integration and usability, which makes it well a...

SKU: LB-AUSBRD | Brand: Little Bird

Light up Australia with the AusBoard. This board is designed and made here in Sydney and has eight WS2812 RGB LEDs.  Each one can be lit up from your Micro:bit and you can use colour to represent different da...

SKU: LB-FINCH | Brand: Little Bird

The Little Bird Finch is our smallest programmable board for e-textiles. Australian made, and a great alternative to the Lilypad / Lilytiny, the Finch is designed to add flashy functionality to your e-textiles or cosp...

SKU: AF-4870 | Brand: Adafruit

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colo...

SKU: EC-MCS01002S | Brand: Elecrow

Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play. Each functio...

SKU: PI-A000053 | Brand: Pimoroni

The Arduino Micro is the smallest board in the Arduino family, based on the ATmega32U4 with built-in USB. Its compact breadboard-friendly form factor makes it easy to integrate into everyday objects and interactive pr...

SKU: DF-DFR0201 | Brand: DFRobot

The Arduino Leonardo is a microcontroller board based on the ATmega32U4, offering the same flash, RAM, and capabilities as the ATmega328 found in the Uno. The key difference is built-in USB communication, allowing the...