Microcontrollers

SKU: EC-ACM82664A | Brand: Elecrow

The Crowduino UNO ESP8266 combines an Arduino UNO-compatible microcontroller with an onboard ESP8266 WiFi module in a single, compact board. Instead of wiring a separate WiFi shield or module, you get integrated wirel...

SKU: EC-SER04013B | Brand: Elecrow

This expansion board is the core controller for a dual-wheel self-balancing robot, designed to plug directly onto an Arduino UNO. It consolidates motor driving, gyroscope, ultrasound, and wireless connectivity interfa...

SKU: EC-ACM36620M | Brand: Elecrow

A simple, yet powerful, 32-bit extension of the Arduino UNO platform. And we design this Crowduino- M0-SD board for you. This board also powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. The po...

SKU: EC-ACA2560MEG | Brand: Elecrow

Elecrow Crowduino Mega2560 board, almost the same usage and performance with the Arduino Mega2560 but with some difference on the power circuit to ensure the power. Based on the ATmega2560 (datasheet). The Elecrow Meg...

SKU: AF-4624 | Brand: Adafruit

Get started with the Adafruit PyBadge LC right away with this all-in-one starter kit. It includes everything you need to build a portable, rechargeable gaming handheld, electronic name badge, or general-purpose develo...

SKU: AF-4653 | Brand: Adafruit

The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-F...

SKU: AF-4537 | Brand: Adafruit

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,00...

SKU: SF-DEV-16790 | Brand: SparkFun

The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to st...

SKU: SF-WRL-15836 | Brand: SparkFun

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission...

SKU: EF-EF01003 | Brand: ElecFreaks

The Freaduino MEGA2560 is an Arduino MEGA 2560 compatible development board from ElecFreaks. It inherits the same pin layout, screw holes, and dimensions as the official Arduino MEGA 2560, so all existing shields, lib...

SKU: EF-EF01001 | Brand: ElecFreaks

Resources: Atmega 328 Datasheet Schematic v1.8 Schematic v2.2 Arduino IDE Arduino UNO Reference Freaduino UNO review,thanks Wilhelm, Mathias Please visit the ElecFreaks wiki page for more info about this product. ...

SKU: SF-DEV-13955 | Brand: SparkFun

The SparkFun OpenLog with Headers is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog can store or "log" huge amounts of serial data and act as a...

SKU: DF-DFR0623 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features an IPEX antenna, a 4MB external SPI flash and 64-Mbit SPI PSRAM that operates at 3...

SKU: AF-4500 | Brand: Adafruit

The Adafruit CLUE is a sensor-packed development board built around the Nordic nRF52840 with Bluetooth Low Energy. It matches the BBC micro:bit form factor and edge-connector pinout, making it compatible with existing...

SKU: AF-4504 | Brand: Adafruit

The Circuit Playground Bluefruit + TFT Gizmo Project Pack bundles everything you need to build wireless, colourful projects with no soldering required. Centred around the Circuit Playground Bluefruit (CPB) with Blueto...

SKU: DF-DFR0624 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The modul...

SKU: DF-KIT0155 | Brand: DFRobot

The Sipeed Maix Bit is a compact AI development board powered by the Kendryte K210 dual-core RISC-V processor. Designed for edge AI and IoT applications, it features an onboard neural network accelerator capable of ru...

SKU: AF-4418 | Brand: Adafruit

Spresense is a compact development board based on Sony’s power-efficient multicore microcontroller CXD5602. It allows developers to create IoT applications in a very short time and is supported by the Arduino IDE as w...

SKU: DF-KIT0145 | Brand: DFRobot

Artificial intelligence tide is sweeping across our world. All open sources developers and AI geekers, good news, come to see this excellent M1W Dock AI development kit! With integrated Micropython in this module, ...

SKU: SF-DEV-15423 | Brand: SparkFun

Looking for a super small microcontroller to use with the Qwiic eco-system? The SparkFun Qwiic Micro is molded to fit our standard 1"x1" Qwiic standard size which makes it one of our smallest micro-controller offering...