Microcontrollers

SKU: AF-5709 | Brand: Adafruit

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...

SKU: AF-4481 | Brand: Adafruit

The Adafruit ItsyBitsy nRF52840 Express brings Bluetooth Low Energy connectivity to the tiny ItsyBitsy form factor. Powered by the Nordic nRF52840 Cortex M4 at 64 MHz with 1 MB Flash, 256 KB RAM, and 2 MB QSPI Flash, ...

SKU: AF-4819 | Brand: Adafruit

The Adafruit MagTag Starter Kit bundles everything you need to get started with the MagTag WiFi E-Ink display. The ESP32-S2-powered board features a 2.9" grayscale E-Ink screen that retains its image even when power i...

SKU: AF-5020 | Brand: Adafruit

The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into an...

SKU: AF-4253 | Brand: Adafruit

The Adafruit Quad 2×2 FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a compact 2×2 grid layout — no stacking headers needed. All four sets of Feather pins are cross-connecte...

SKU: AF-3816 | Brand: Adafruit

This bolt-on hardware kit provides M3 standoffs and screws for securely mounting a Circuit Playground Express, Circuit Playground Classic, micro:bit, Gemma M0, Flora, or other small circular/compact boards to your pro...

SKU: SF-WRL-17830 | Brand: SparkFun

The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music stre...

SKU: AF-4979 | Brand: Adafruit

The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gat...

SKU: EC-CCW08266S | Brand: Elecrow

This ESP-12S WiFi module has core processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, clock speed s...

SKU: SF-DEV-15444 | Brand: SparkFun

The SparkFun RedBoard Artemis brings the powerful Artemis module into a familiar Arduino Uno footprint. Built around the Ambiq Apollo3 processor, it runs at 48 MHz (with 96 MHz turbo mode), includes BLE 5.0, and draws...

SKU: LB-LS0537 | Brand: Little Bird

The DT-06 is a compact Wi-Fi-to-TTL serial module based on the ESP8285 — essentially an ESP8266 with 1 MB of built-in SPI flash. It provides a simple way to add Wi-Fi connectivity to any microcontroller project via a ...

SKU: LB-LR0183 | Brand: Little Bird

A LilyPad-compatible microcontroller board based on the ATmega32U4, designed for e-textile and wearable electronics projects. The built-in USB communication allows the board to appear as a mouse, keyboard, or virtual ...

SKU: AF-2900 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Hea...

SKU: AF-2945 | Brand: Adafruit

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your F...

SKU: SF-DEV-11224 | Brand: SparkFun

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for fa...

SKU: AF-3201 | Brand: Adafruit

Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and...

SKU: DF-DFR0213 | Brand: DFRobot

The Dreamer Nano V4 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack ...

SKU: AF-2590 | Brand: Adafruit

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with th...

SKU: SF-DEV-10524 | Brand: SparkFun

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to ...

SKU: AF-2926 | Brand: Adafruit

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...