LoRa & Cellular Modules

SKU: DF-TEL0122 | Brand: DFRobot

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT bu...

SKU: SF-WRL-09143 | Brand: SparkFun

A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/180...

SKU: TB-XC4392 | Brand: Little Bird

The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semt...

SKU: SF-CEL-00290 | Brand: SparkFun

A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standar...

SKU: AF-3070 | Brand: Adafruit

The Adafruit RFM69HCW Transceiver Radio Breakout @ 868/915 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX12...

SKU: AF-3177 | Brand: Adafruit

The Feather M0 RFM69HCW Packet Radio (433 MHz) combines the ATSAMD21G18 ARM Cortex M0+ processor with an SX1231-based RFM69HCW radio transceiver for wireless data communication at 433 MHz. It includes built-in USB, Li...

SKU: AF-3237 | Brand: Adafruit

That's one slim cellular antenna! At 238mm long from tip to tip and and with a cable thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts ou...

SKU: DF-FIT0453 | Brand: DFRobot

A GSM antenna with SMA connector and magnetic base for easy mounting on ferrous metal surfaces. The 3 m extension cable uses 174 pure copper construction for low impedance, and the antenna provides 2.5 dBi signal gain...

SKU: DF-FIT0454 | Brand: DFRobot

This is a small built-in spring GSM antenna with IPX connector. Its working frequency is 900/1800 MHz which meets most requirements of GSM applications. Its very compact size makes it easy to carry and use. ...

SKU: AF-1858 | Brand: Adafruit

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Anten...

SKU: SF-WRL-28896 | Brand: SparkFun

  The RockBLOCK 9704 by Ground Control is a breakout board for the new Iridium 9704 including a built-in patch antenna and a supercap charger to enable low power operation. If you need low data rate connectiv...

SKU: SF-GPS-27500 | Brand: SparkFun

The u-blox ANN-MB2 is a high-precision multi-band active GNSS antenna designed for centimeter-level positioning accuracy. Supporting L1/L2/L5/E6/B3 frequency bands across multiple satellite constellations, this antenn...

SKU: WS-30717 | Brand: Waveshare

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite nav...

SKU: DF-TEL0182 | Brand: DFRobot

The SIM7070G is a globally compatible NB-IoT communication module supporting CAT-M, NB-IoT, GSM, GPRS, and EDGE wireless protocols. It also features integrated GNSS satellite positioning with support for GPS, GLONASS,...

SKU: DF-TEL0162 | Brand: DFRobot

##Introduction The SIM7600G-H is an integrated wireless communication module featuring 4G CAT4 (with anuplink speed of 50Mbps and a downlink speed of 150Mbps) and GNSS positioning (supportingGPS, BD, GLONASS). It exte...

SKU: DF-TEL0161 | Brand: DFRobot

##Introduction The SIM7600G is an integrated wireless communication module. It features 4G CAT1 with an uplink speed of 5Mbps and a downlink speed of 10Mbps, and supports GNSS positioning (GPS, BD, GLONASS). The modul...

SKU: DF-DFR1058 | Brand: DFRobot

##Introduction Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC with industrial IoT capabilities. Opta is equipped with frequently used networks and protocols in multiple industr...

SKU: SF-WRL-25068 | Brand: SparkFun

The 2J7426MPz by 2J Antennas is a high-performance compact antenna certified for use with the Iridium satellite communication system. Manufactured from polycarbonate (PC) and acrylic-styrene-acrylate terpolymer (ASA),...

SKU: SF-WRL-22329 | Brand: SparkFun

The Digi XBee 3 Global Cellular module is a compact, low-power module designed for rapid integration of cellular IoT capabilities. It combines LTE-M, NB-IoT, and 2G connectivity with Bluetooth Low Energy (BLE) and GNS...

SKU: SF-GPS-23847 | Brand: SparkFun

The SPK-6E is a compact, lightweight tri-band helical GNSS antenna supporting L1, L2, and L5 frequencies across GPS, GLONASS, Galileo, and BeiDou constellations. Weighing just 18.1 g with a standard SMA connector, it'...