LEDs

SKU: LB-LAMP-PCB | Brand: Little Bird

This DIY Lamp Kit PCB provides a simple platform for building your own custom LED lamp. The board has pads for up to 8 LEDs wired in series, a switch, a current-limiting resistor, and a power input — giving you comple...

SKU: AF-2174 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a bevelled finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The bevelled ...

SKU: SF-COM-11841 | Brand: SparkFun

A snap-in plastic LED holder designed for 10 mm LEDs. Simply press the LED into the holder and snap the assembly into a 35/64″ (approximately 14 mm) panel hole — no screws or tools required. Key Features Snap-In De...

SKU: SF-COM-11147 | Brand: SparkFun

These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean look. These LED holders accept a 5mm LED and mount into an 11/32" diameter hole.

SKU: AF-2175 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel si...

SKU: AF-4749 | Brand: Adafruit

A nice whoppin' rectangular slab of some lovely black acrylic to add some extra diffusion to your LED Matrix project. This material is 2.6mm (0.1") thick and is made of special cast acrylic that makes it perfect for g...

SKU: AF-4594 | Brand: Adafruit

A sheet of black LED diffusion acrylic designed to enhance the look of LED matrix and NeoPixel projects. This specially cast acrylic sharpens individual pixels and reduces glare, delivering vivid, readable colours bot...

SKU: AF-1004 | Brand: Adafruit

These ingenious little clips make it easier than ever to use our analog RGB LED strips - no need to solder! The clips snap onto the ends of the LED strip and hold securely. They're not waterproof but you could cover t...

SKU: AF-1762 | Brand: Adafruit

These breakout PCBs make it easy to use 5050-size SMD LEDs on a solderless breadboard. Solder a 5050 LED to either side of the PCB and the pins drop straight into standard 0.1″ breadboard rows — no adapter wiring need...

SKU: SF-COM-11840 | Brand: SparkFun

These snap-in plastic LED holders provide a clean, secure way to panel-mount 5 mm LEDs. Simply press the LED into the holder and snap the holder into a 7.5 mm (19/64″) mounting hole — no screws or adhesive required. T...

SKU: SF-COM-25893 | Brand: SparkFun

This is a 5mm right angle light pipe to get the light of an LED out the end plate of an enclosure. We couldn't find a light pipe that fit all our needs, so we made it! This clip snaps over any SMD LED that is 1206 siz...

SKU: KI-2746 | Brand: Kitronik

When using through hole LEDs it can be hard to form the eyelets and then work out which leg is positive and negative. That's where these Sewable LED Holders come in! The 5mm LED holder boards, quickly and easily take ...

SKU: AF-1644 | Brand: Adafruit

These nylon clips will let you attach our flexible NeoPixel strips to a wall, moulding, or project. Just side the rubber tubing thru so that the clips are in between two LEDs. Comes in a pack of 5.

SKU: AF-2171 | Brand: Adafruit

Keep your 10mm LEDs securely mounted with these plastic bevel-style LED holders. Simply slot the LED through the opening and it snaps into place, giving a clean, finished look to your project. Key Features 10mm LED...

SKU: AF-2176 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a narrow bevel finish. Slot the LED through the opening, insert the plastic retaining cap, and tighten the threaded washer for a clea...

SKU: AF-2178 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide concave bevel finish. The concave bezel creates a recessed look around the LED, adding a polished, professional touch to panel...

SKU: AF-2177 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide convex bevel finish. The raised convex bezel adds a bold, dome-shaped profile around the LED, giving panels and enclosures a d...

SKU: AF-3088 | Brand: Adafruit

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two sha...

SKU: AF-774 | Brand: Adafruit

For those that want to cut, customize, and cap our awesome Digital Addressable RGB LED strips we now have a pack of the little rubber caps. These fit perfectly over the strips, use silicone glue to secure and water...