LEDs

SKU: LB-00211 | Brand: Little Bird

The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft project...

SKU: LB-ETEXTILELED-Y | Brand: Little Bird

This is a simple single unit YELLOW E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB ...

SKU: LB-LS0538 | Brand: Little Bird

A cute little module that allows you to turn on and off the Red, Yellow and Green lights and 'control traffic'

SKU: LB-EAGLED-LED-Y | Brand: Little Bird

EagLED yellow sewable LEDs designed for e-textiles and wearable electronics. These Australian-made LEDs come attached in a strip — simply snap them apart and sew into clothing, accessories, or fabric projects using co...

SKU: LB-ETEXTILELED-YG | Brand: Little Bird

A single yellow-green LED module designed for e-textiles projects. Each unit features sewable tabs so it can be stitched directly into fabric using conductive thread. The thicker PCB design makes it more durable than ...

SKU: AF-1444 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired...

SKU: SF-DEV-13903 | Brand: SparkFun

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rai...

SKU: AF-3488 | Brand: Adafruit

This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA fro...

SKU: AF-1191 | Brand: Adafruit

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...

SKU: AF-1269 | Brand: Adafruit

The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2...

SKU: DF-DFR0785 | Brand: DFRobot

A pack of five LED-illuminated push buttons in the DFRobot Gravity format. Each button lights up a different colour (red, yellow, green, blue, and white) when pressed, providing clear visual feedback. The digital outp...

SKU: AF-1441 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in yellow LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger...

SKU: AF-2158 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a be...

SKU: DF-FIT0842 | Brand: DFRobot

An ultra-thin flexible LED strip in yellow, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requireme...

SKU: AF-4119 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of yellow LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 1...

SKU: AF-2993 | Brand: Adafruit

A tri-colour tower light with red, yellow, and green LED segments plus a built-in buzzer, powered by 12V DC. Each light and the buzzer are independently controlled via separate wires, making it easy to indicate machin...

SKU: AF-2948 | Brand: Adafruit

The Adafruit LED Charlieplexed Matrix is a 9×16 grid of yellow LEDs arranged in a Charlieplexed configuration. Designed to pair with the IS31FL3731 LED matrix driver, this display lets you create scrolling text, anima...

SKU: AF-3431 | Brand: Adafruit

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a ...

SKU: DF-DFR0487 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the Io...

SKU: AF-5435 | Brand: Adafruit

A miniature traffic light standing 6.5 cm tall, featuring red, yellow, and green LEDs. Perfect for dioramas, model sets, dollhouses, and electronics learning projects. The LEDs are common anode — connect 3–6V to the b...