LCD & OLED Displays

SKU: DF-DFR0063 | Brand: DFRobot

This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background. Usually, Arduino LCD display projects will run out of pin resources...

SKU: WS-19750 | Brand: Waveshare

A 2.23″ monochrome OLED display module designed to plug directly onto the Raspberry Pi Pico via the onboard female pin header. The SSD1305 driver supports both 4-wire SPI and I2C interfaces, giving you flexibility in ...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...

SKU: WS-13992 | Brand: Waveshare

A 1.5-inch OLED display module with 128×128 pixel resolution and 16-level greyscale, driven by the SSD1327 controller. Communicates via SPI or I2C interface (selectable via onboard resistor), and operates at both 3.3V...

SKU: WS-25093 | Brand: Waveshare

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard vol...

SKU: WS-25512 | Brand: Waveshare

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage trans...

SKU: WS-25742 | Brand: Waveshare

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provid...

SKU: WS-25587 | Brand: Waveshare

The Waveshare OLED/LCD HAT (A) combines a 2-inch IPS LCD main screen with dual 0.96-inch blue OLED secondary screens on a single Raspberry Pi HAT. It's ideal for displaying system stats, status indicators, and small g...

SKU: WS-30953 | Brand: Waveshare

A 0.96″ white OLED display module designed to snap into the Argon ONE V5 case for Raspberry Pi. Once installed and configured, it displays real-time system information including CPU temperature, uptime, and IP address...

SKU: DF-DFR0934 | Brand: DFRobot

This is a 1.51” SSD1309 transparent monochrome OLED display (light blue) with a converter. It offers a resolution of 128×64 (The completely transparent area is 128×56.  There is a small section near the pins t...

SKU: DF-DFR0647 | Brand: DFRobot

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables,...

SKU: DF-DFR0650 | Brand: DFRobot

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low powe...

SKU: DF-DFR0648 | Brand: DFRobot

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size,...

SKU: AF-938 | Brand: Adafruit

A crisp 1.3" monochrome OLED display with 128×64 white pixels, driven by the SSD1306 controller. Each pixel is individually addressable, and because OLEDs emit their own light, no backlight is needed — resulting in ex...

SKU: AF-3045 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assemble...

SKU: DF-DFR0486 | Brand: DFRobot

The Gravity I²C OLED-2864 is a 0.96″ blue OLED display module driven by the SSD1306 controller. It communicates via I²C and refreshes at up to 60 Hz, making it ideal for real-time data readouts on Arduino and other mi...

SKU: AF-3531 | Brand: Adafruit

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individ...

SKU: AF-326 | Brand: Adafruit

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excelle...

SKU: AF-2900 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Hea...

SKU: AF-198 | Brand: Adafruit

Standard HD44780 LCDs are useful for creating standalone projects. 20 characters wide, 4 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Single LED backli...