LCD & OLED Displays

SKU: LB-LR0085 | Brand: Little Bird

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V ra...

SKU: KI-56115 | Brand: Kitronik

The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The onboard edge connector allows the micro:bit to slot into the board without any addit...

SKU: WS-30953 | Brand: Waveshare

A 0.96″ white OLED display module designed to snap into the Argon ONE V5 case for Raspberry Pi. Once installed and configured, it displays real-time system information including CPU temperature, uptime, and IP address...

SKU: DF-DFR0647 | Brand: DFRobot

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables,...

SKU: DF-DFR0650 | Brand: DFRobot

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low powe...

SKU: DF-DFR0648 | Brand: DFRobot

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size,...

SKU: DF-DFR0486 | Brand: DFRobot

The Gravity I²C OLED-2864 is a 0.96″ blue OLED display module driven by the SSD1306 controller. It communicates via I²C and refreshes at up to 60 Hz, making it ideal for real-time data readouts on Arduino and other mi...

SKU: AF-3531 | Brand: Adafruit

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individ...

SKU: AF-2900 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Hea...

SKU: AF-4440 | Brand: Adafruit

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumpti...

SKU: AF-931 | Brand: Adafruit

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast,...

SKU: AF-661 | Brand: Adafruit

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent ...

SKU: AF-3527 | Brand: Adafruit

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP ...

SKU: AF-938 | Brand: Adafruit

A crisp 1.3" monochrome OLED display with 128×64 white pixels, driven by the SSD1306 controller. Each pixel is individually addressable, and because OLEDs emit their own light, no backlight is needed — resulting in ex...

SKU: SF-LCD-13003 | Brand: SparkFun

The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on...

SKU: DF-DFR0413 | Brand: DFRobot

This 0.96″ 128×64 OLED Display Module is designed for Raspberry Pi projects where a compact, low-power screen is needed to show system information such as IP addresses, CPU temperature, and status messages. The SSD130...

SKU: SF-LCD-22495 | Brand: SparkFun

A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard us...