Jumpers & Wires

SKU: SF-PRT-10373 | Brand: SparkFun

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway he...

SKU: AF-760 | Brand: Adafruit

A 40-piece set of premium male-to-male jumper wires in a rainbow ribbon cable format. Each wire is 12″ (300mm) long with 0.1″ (2.54mm) male header contacts on both ends, fitting cleanly on standard-pitch headers and b...

SKU: SF-PRT-09916 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector f...

SKU: AF-793 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" female ...

SKU: AF-1955 | Brand: Adafruit

These Male/Male Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbo...

SKU: SF-CAB-09556 | Brand: SparkFun

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-b...

SKU: SF-PRT-09385 | Brand: SparkFun

A pack of 10 premium 12″ (30 cm) male-to-female jumper wires for breadboarding, prototyping, and connecting to 0.1″ pitch headers. Each wire has a male pin on one end and a female socket on the other, making them vers...

SKU: LB-LS7522 | Brand: Little Bird

A 30cm breakout cable with a Micro-USB plug on one end and clearly labelled screw terminals on the other. Provides easy access to power and data lines for prototyping, enclosures, and custom installations without sold...

SKU: AF-6036 | Brand: Adafruit

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforwa...

SKU: AF-5619 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not ...

SKU: AF-5497 | Brand: Adafruit

We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of color-coded wire. This solid 2.5mm pitch connector exten...

SKU: AF-5357 | Brand: Adafruit

This double-row 2×17 (34-pin) IDC box header with 2.54 mm (0.1″) pitch is commonly used for floppy disk drive interfaces and other legacy 34-pin IDC ribbon cable connections. The keyed box header ensures correct cable...

SKU: DF-FIT0864 | Brand: DFRobot

These solderless 4-pin snap-down connector cables make it easy to bridge a gap between two pieces of cuttable RGB LED strip without soldering. Each cable has a snap-down connector on both ends with a wire in between, ...

SKU: SF-WRL-18569 | Brand: SparkFun

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). W...

SKU: AF-4736 | Brand: Adafruit

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Sili...

SKU: DF-FIT0689 | Brand: DFRobot

This 10 cm FPC flat-flex ribbon cable is designed for use with DFRobot GDI (General Display Interface) displays. The 18-pin reverse-contact cable is durable and resistant to damage even when bent sharply, with insulat...

SKU: AF-3889 | Brand: Adafruit

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicon...

SKU: AF-3164 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: PI-CAB1200 | Brand: Pimoroni

This wiring loom has all the cables and connectors you'll need to connect a joystick, arcade buttons, and illuminated button to Picade X HAT. It's ideal for DIY arcade cabinet builds. The loom consists...

SKU: AF-973 | Brand: Adafruit

A 50 cm (19.5″) servo extension cable for extending the reach of standard 3-pin servo connections. It features a shrouded male connector on one end and a female connector on the other, with red/black/white colour codi...