Jumpers & Wires

SKU: SF-PRT-08866 | Brand: SparkFun

Standard 22 AWG stranded hook-up wire in white. Stranded wire is more flexible than solid core, making it ideal for projects where the wire needs to bend or will be subject to repeated movement and stress. Specificat...

SKU: SF-PRT-08865 | Brand: SparkFun

Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.

SKU: DF-FIT0251 | Brand: DFRobot

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they've already been plugged in, or when you have many cables going to differnet places. NOTE: Longer sleeving is av...

SKU: SF-PRT-08232 | Brand: SparkFun

A 3-pin polarised male header with standard 0.1" (2.54mm) pin spacing. The keyed design prevents incorrect or reversed connections, making it ideal for power and sensor connections on perfboard and PCB projects. Spec...

SKU: SF-PRT-08097 | Brand: SparkFun

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. T...

SKU: SF-PRT-08027 | Brand: SparkFun

Standard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: SF-PRT-08026 | Brand: SparkFun

A 25 ft (7.6 m) spool of white 22 AWG solid-core hook-up wire. Solid core holds its shape when bent, making it ideal for breadboard prototyping and point-to-point wiring. Specifications Wire Type – Solid core Gaug...

SKU: DF-FIT0335 | Brand: DFRobot

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is c...

SKU: SF-CAB-00506 | Brand: SparkFun

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs.Dimensions: 36" Long

SKU: SF-COM-11707 | Brand: SparkFun

Do you fear that your power may not be “far reaching” enough? How would another 6' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 6' of power cable is exactly what your project needs. Do...

SKU: SF-COM-11706 | Brand: SparkFun

Do you fear that your power may not be “far reaching” enough? How would another 3' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Do...

SKU: AF-370 | Brand: Adafruit

A 6" (150mm) IDC ribbon cable with 10-pin 2×5 socket connectors on both ends at standard 2.54mm (0.1") pitch. Commonly used for AVR ISP programming, JTAG connections, and other 10-pin box header interfaces. Key Featu...

SKU: AF-425 | Brand: Adafruit

A 4-pin Molex power cable that matches the hard drive/CD-ROM power connectors found on AT and ATX power supplies. Use it to tap into 5V or 12V DC from a desktop power supply for your projects — a convenient source of ...

SKU: AF-447 | Brand: Adafruit

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...

SKU: SF-WRL-12861 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...

SKU: AF-1873 | Brand: Adafruit

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins t...

SKU: SF-PRT-10370 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10364 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10369 | Brand: SparkFun

A 6" (15 cm) four-wire jumper cable with 4-pin JST RE connectors on both ends, designed for board-to-board connections on standard 0.1" (2.54 mm) pitch headers. Specifications Wires – 4 Connector – 4-pin JST RE on...

SKU: SF-PRT-10368 | Brand: SparkFun

A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications ...