Jumpers & Wires
Browse our range of jumper wires, hook-up wire, ribbon cables, and IDC connectors for your next project. From breadboard jumper leads to splittable wire sets and PicoBlade-compatible cables, we stock the wiring essentials you need for prototyping and permanent builds.
Ideal for Arduino, Raspberry Pi, micro:bit, and general electronics work — whether you're a student learning circuits, a maker building something new, or a professional wiring up a prototype. Fast shipping across Australia.
Interface Cable - SMA Male to SMA Female (25cm, RG174)
SKU: SF-CAB-22034 | Brand: SparkFun
A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA co...
Delivered by Thu 18 Jun
Snap Action 3-to-9 Wiring Block Connector
SKU: AF-5614 | Brand: Adafruit
Snap action wiring blocks make it easy to connect and split wires without soldering, crimping, or tools. This 3-to-9 block has three colour-coded inputs (green, yellow, red), each fanning out to three matching outputs...
Delivered by Wed 8 Jul
Retractable Stacking Banana Plug Cable - Black 0.5 meter long
SKU: AF-5472 | Brand: Adafruit
Why are bananas never lonely? Because they hang around in bunches!A lot of power supplies, multimeters, and other benchtop equipment use standard 4mm banana plugs to connect this-to-that. When you need more, we now st...
Delivered by Wed 8 Jul
Retractable Stacking Banana Plug Cable - Red 0.5 meter long
SKU: AF-5471 | Brand: Adafruit
A 0.5-metre red banana plug cable with stackable connectors and retractable safety shrouds. The spring-loaded plastic cover retracts automatically when plugged into a 4 mm banana jack, then extends to cover the metal ...
Delivered by Wed 8 Jul
Pogo Pin Probe Clip - 2x5 1.27mm Pitch SWD
SKU: AF-5434 | Brand: Adafruit
The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with an array of built-in sprin...
Delivered by Wed 8 Jul
RP-SMA to w.FL / MHF3 / IPEX3 Adapter
SKU: AF-5444 | Brand: Adafruit
An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such a...
Delivered by Wed 8 Jul
EYESPI Cable - 18-pin 50mm long Flex PCB (FPC) A-B Type
SKU: AF-5462 | Brand: Adafruit
Connect this to that when an 18-pin FPC connector is needed. This 50mm long cable is made of a flexible PCB. It's A-B style which means that pin one on one side will match with pin one on the other side. How handy! We...
Delivered by Wed 8 Jul
IDE Molex 4-pin Plug Cable - 30cm long
SKU: AF-5391 | Brand: Adafruit
If you're messing around with floppy drives, or disk drives, or other devices that are usually powered with a PC motherboard you'll often see these big 'Molex' connectors used to provide power. They are used to give 5...
Delivered by Thu 18 Jun
Audio Cable TRS - 1m
SKU: SF-CAB-18983 | Brand: SparkFun
A 1-metre TRS (Tip, Ring, Sleeve) audio cable with standard 3.5mm plugs on both ends. Suitable for connecting audio devices, development boards with 3.5mm jacks, and other three-conductor applications. Specifications...
Delivered by Thu 18 Jun
Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)
SKU: DF-FIT0773 | Brand: DFRobot
The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont port, compatible with standard breadboard pin pitch ...
Delivered by Mon 29 Jun
Gravity: Digital Sensor Cable for Arduino - 50cm (10 Pack)
SKU: DF-FIT0756 | Brand: DFRobot
This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and...
Delivered by Mon 29 Jun
40-pin 0.5mm FFC / FPC Extender
SKU: AF-4523 | Brand: Adafruit
A simple 40-pin FFC/FPC extender that connects two 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. Ideal for reaching between components that are further apart than a single cable allows...
Delivered by Wed 8 Jul
50-pin 0.5mm FFC / FPC Extender
SKU: AF-4522 | Brand: Adafruit
This 50-pin FFC/FPC extender lets you connect two 50-pin 0.5mm pitch flat cables end-to-end to extend their total length. Simply plug a cable into each side of the board and you have a longer cable run — useful when t...
Delivered by Wed 8 Jul
2.54mm 0.1" Pitch 2-pin Jumper Cable - 20cm long
SKU: AF-4934 | Brand: Adafruit
A 2-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loos...
Delivered by Wed 8 Jul
2.54mm 0.1" Pitch 3-pin Jumper Cable - 20cm long
SKU: AF-4935 | Brand: Adafruit
A 3-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loos...
Delivered by Wed 8 Jul
1.25mm Pitch 6-pin Cable Matching Pair - 10 cm long
SKU: AF-4986 | Brand: Adafruit
A matching pair of 1.25 mm pitch cables with 6-pin connectors — one inline socket and one plug — that friction-lock together for a secure, reliable connection. Each cable is 10 cm long, making them well suited for tig...
Delivered by Wed 8 Jul
EYESPI Cable - 18 Pin 100mm long Flex PCB (FPC) A-B type
SKU: AF-5239 | Brand: Adafruit
Connect this to that when a 18-pin FPC connector is needed. This 25 cm long cable is made of a flexible PCB. It's A-B style which means that pin one on one side will match with pin one on the other side. How handy! W...
Delivered by Wed 8 Jul
Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch
SKU: SF-CAB-18079 | Brand: SparkFun
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is ty...
Delivered by Thu 18 Jun
Breadboard to JST-ZHR Cable - 4-pin x 1.5mm Pitch
SKU: SF-CAB-18080 | Brand: SparkFun
This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a s...
Delivered by Thu 18 Jun
1.25mm Pitch 4-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
SKU: AF-4924 | Brand: Adafruit
This 1.25 mm pitch 4-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wi...
Delivered by Wed 8 Jul
