Jumpers & Wires

SKU: SF-PRT-10376 | Brand: SparkFun

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway head...

SKU: SF-PRT-10371 | Brand: SparkFun

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: AF-824 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male he...

SKU: AF-825 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1...

SKU: AF-2098 | Brand: Adafruit

A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The...

SKU: AF-6412 | Brand: Adafruit

We accidentally got these cables that were supposed to be assembled into Slim HDMI cables - but obviously are missing the actual connectors. So we're putting them on clearance since they might be useful for some build...

SKU: AF-6182 | Brand: Adafruit

A 10-wire silicone-covered ribbon cable that's extremely supple and flexible. The silicone sheathing handles temperatures up to 200°C and voltages up to 600 V — far beyond what PVC-covered wire can manage. Pull and se...

SKU: DF-FIT0957 | Brand: DFRobot

The IPEX4 to SMA Female Connector Cable is a 200 mm adapter designed for single-board computers equipped with an IPEX4 (MHF4) wireless interface, including the LattePanda 3 Delta, LattePanda 2 Alpha, and LattePanda 2 ...

SKU: DF-FIT0975 | Brand: DFRobot

##Introduction This power cord is specially designed for LattePanda Sigma users and can provide stable power supply to Sigma. One end of the cable adopts an ATX-24Pin chassis power connector for connecting to the chas...

SKU: SF-CAB-25070 | Brand: SparkFun

This custom-designed OBD-II cable from Macchina functions as both a splitter and at about one meter (~39 inches) in length, as an OBD-II extension cable. Unlike other cables out there, all 16 pins connected between ea...

SKU: SF-CAB-25596 | Brand: SparkFun

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Ada...

SKU: AF-5917 | Brand: Adafruit

A 5.5×2.1mm DC barrel polarity reversing cable that swaps centre-negative to centre-positive (or vice versa). Simply plug it inline between your DC power supply and device to reverse the polarity — no rewiring require...

SKU: SF-CAB-22038 | Brand: SparkFun

This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 10M (393.7in.) long with RG58 housing. The RP-SMA connectors at each end are small enough for most consumer GPS, ...

SKU: SF-CAB-22034 | Brand: SparkFun

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA co...

SKU: AF-5614 | Brand: Adafruit

Snap action wiring blocks make it easy to connect and split wires without soldering, crimping, or tools. This 3-to-9 block has three colour-coded inputs (green, yellow, red), each fanning out to three matching outputs...

SKU: AF-5472 | Brand: Adafruit

Why are bananas never lonely? Because they hang around in bunches!A lot of power supplies, multimeters, and other benchtop equipment use standard 4mm banana plugs to connect this-to-that. When you need more, we now st...

SKU: AF-5471 | Brand: Adafruit

A 0.5-metre red banana plug cable with stackable connectors and retractable safety shrouds. The spring-loaded plastic cover retracts automatically when plugged into a 4 mm banana jack, then extends to cover the metal ...

SKU: AF-5434 | Brand: Adafruit

The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with an array of built-in sprin...

SKU: AF-5444 | Brand: Adafruit

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such a...