Jumpers & Wires

SKU: AF-4029 | Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors o...

SKU: PI-CAB0505 | Brand: Pimoroni

A 175mm black GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/...

SKU: TB-HM3250 | Brand: Little Bird

A 40-pin (2×20) dual in-line (DIL) jumper strip rated at 3A. The snap-apart design lets you break the strip into individual 2-pin jumper shunts or smaller groups to suit your needs. Key Features Snap-Apart Design –...

SKU: PJ-HEADER_12X1 | Brand: Little Bird

A single-row male pin header strip with 12 pins at standard 0.1" (2.54 mm) spacing. Designed for soldering into PCBs and breakout boards, these headers provide reliable connections for breadboarding, jumper wires, and...

SKU: PJ-HEADER_14X1 | Brand: Little Bird

Pins (header), 14 pins, 0.1 inch (2.54 mm) spacing

SKU: AF-1884 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1883 | Brand: Adafruit

Super-flexible silicone-sheathed stranded-core wire rated for up to 200°C and 600V. The silicone insulation is far more flexible and heat-resistant than standard PVC wire, making it ideal for wearables, robotics, and ...

SKU: AF-1878 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1880 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: SF-PRT-08670 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length Documents: JST connector

SKU: SF-PRT-08096 | Brand: SparkFun

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. ...

SKU: SF-CAB-00065 | Brand: SparkFun

A straight-through RS-232 serial cable with DB9 male-to-female connectors, suitable for connecting development boards, serial devices, and legacy equipment to computers with a standard serial port. Key Features DB9...

SKU: AF-206 | Brand: Adafruit

A 150mm (6″) jumper cable with 6 conductors at 0.1″ (2.54mm) spacing. Features female socket connectors on both ends for quick plug-in connections to header pins. Key Features Socket-to-Socket – Female connectors o...

SKU: PL-970 | Brand: Pololu

The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top black housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardw...

SKU: PL-968 | Brand: Pololu

The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top blue housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardwa...

SKU: AF-447 | Brand: Adafruit

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...

SKU: SF-PRT-09922 | Brand: SparkFun

A six-wire cable assembly with a 6-pin Molex connector (0.1″ spacing) on one end and bare wires on the other. Includes the mating connector, making it easy to create board-to-board connections or custom wiring harness...

SKU: SF-PRT-09918 | Brand: SparkFun

A two-wire jumper cable with a 2-pin Molex connector (2.54 mm / 0.1" spacing) on one end and bare wire on the other. Includes the mating connector for the Molex header. Useful for board-to-board connections and genera...

SKU: AF-866 | Brand: Adafruit

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Each block connector has a metal block inside and three levers that snap ...

SKU: DF-FIT0514 | Brand: DFRobot

These wire offers you the best way to connect sensors and actuators to your LattePanda! They are specially designed for LattePanda and DFRobot Gravity Sensors. It compatible with a wide range of Gravity sensors and...