IoT Devices & Platforms

SKU: EC-ILM13205D2-915 | Brand: Elecrow

The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and recei...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...

SKU: SF-KIT-22636 | Brand: SparkFun

Building a weather station can be rewarding whether you're an agriculturalist, professional meteorologist, or weather hobbyist. Create your own weather station effortlessly using SparkFun's Arduino IoT Weather Stat...

SKU: DF-DFR0944 | Brand: DFRobot

##Introduction The EDGE102-DMX512 controller is an advanced lighting control system designed to manage stage, theater, and venue lighting using the DMX512 protocol. With a variety of interfaces—including RS485, I2C, a...

SKU: DF-TEM2022B-EN-1 | Brand: DFRobot

An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and a...

SKU: DF-DFR0923 | Brand: DFRobot

Note: The expansion shield is ONLY compatible with FireBeetle 2 ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth).This expansion shield for FireBeetle 2 is just right for makers who love using terminal blocks f...

SKU: SF-WRL-25497 | Brand: SparkFun

The Espressif Thread Border Router combines Espressif's Wi-Fi and 802.15.4 SoCs to bridge Thread mesh networks with IP-based networks. Built on ESP-IDF and the open-source OpenThread stack, it has obtained Thread 1.3 ...

SKU: SF-DEV-21307 | Brand: SparkFun

WVR is a next-generation sample player powered by an ESP32. WVR features 8GB of memory and an advanced Web GUI where users upload audio and manage configuration and firmware. WVR is Arduino compatible and open-source,...

SKU: DF-DFR0835 | Brand: DFRobot

This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 graysc...

SKU: DF-DFR0901 | Brand: DFRobot

The 10 I/Os Relay Module with ESP32 is an industrial PLC that combines the connectivity of the ESP32 (Wi-Fi, Bluetooth LE, Ethernet, RS485) with relay outputs for switching higher-voltage loads. It provides a simple, ...

SKU: AF-3606 | Brand: Adafruit

The Mongoose OS Google IoT Core Pack is a complete starter kit for building IoT projects with Google Cloud, built around the Adafruit Feather HUZZAH32 (ESP32). Developed in collaboration with Google and Mongoose OS, t...