Industrial

SKU: DF-DFR0904 | Brand: DFRobot

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 21 I/Os including 6 analog and digital inputs...

SKU: DF-DFR0901 | Brand: DFRobot

The 10 I/Os Relay Module with ESP32 is an industrial PLC that combines the connectivity of the ESP32 (Wi-Fi, Bluetooth LE, Ethernet, RS485) with relay outputs for switching higher-voltage loads. It provides a simple, ...

SKU: DF-DFR0899 | Brand: DFRobot

The 10 I/Os Relay Module is an industrial PLC based on the Arduino Nano with relay outputs for switching higher-voltage loads. It provides a simple, cost-effective, and open-source approach to industrial monitoring an...

SKU: DF-DFR0898 | Brand: DFRobot

The 10 I/Os PLC Module is an industrial programmable logic controller based on the Arduino Nano. It provides a simple, cost-effective, and open-source approach to industrial monitoring and control, with standardised P...

SKU: DF-FIT0751 | Brand: DFRobot

This 0.4 mm heat-resistant welding wire is built from seven 0.08 mm silver-plated copper conductors with a PFA insulation jacket. It handles temperatures from −60 °C to +250 °C, making it suitable for fine soldering w...

SKU: DF-FIT0853 | Brand: DFRobot

This M12 to RJ45 Ethernet adapter uses M12 female 4 pin D coded with IP67 waterproof rating, which is impervious to dust and short-term soaking, safe and reliable to use. There are metal shielding layers on the RJ45 p...

SKU: DF-FIT0770 | Brand: DFRobot

This is a background suppression photoelectric switch with 15mm-350mm adjustable detection range (can be adjusted by the knob). Its response time is only 0.5ms, fast and stable. Adopting eco-friendly and durable ABS m...

SKU: DF-FIT0759 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-DFR0684 | Brand: DFRobot

An industrial-grade RS485 expansion shield designed specifically for the LattePanda V1. This shield adds a reliable, isolated RS485 interface (via OPEN4) with comprehensive protection including signal isolation, power...

SKU: EC-WWF2232USR | Brand: Elecrow

This Serial WiFi module is you best choice for you to connect your application to the internet. It is a complete ultra low power embedded TCP/IP solution. It is a standalone, embedded wireless 802.11b/g networking mod...

SKU: EC-MCP00101P | Brand: Elecrow

This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for programming(Arduino Pro Mini), debug some hardware...

SKU: AF-4660 | Brand: Adafruit

A rugged, chrome-plated latching pushbutton with a built-in RGB LED ring. Drill a 16 mm hole in any panel up to 6.35 mm (1/4") thick and mount it securely — an included rubber gasket provides a water-resistant seal fo...

SKU: DF-SEN0360 | Brand: DFRobot

F1031V Mass Air Flow Sensor adopts thermodynamic principle to detect flow rate of gas medium in the flow channel, with high precision and good repeatability. It comes with built-in temperature sensor to provide temper...

SKU: AF-4511 | Brand: Adafruit

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required - Just flick up the little levers and slide in your st...

SKU: DF-FIT0658 | Brand: DFRobot

This compact 5V inductive proximity switch detects metal objects at distances up to 4mm without physical contact. It features an NPN normally-open output, a fast response time under 1ms, and a 1,000Hz switching freque...

SKU: DF-SEN0329 | Brand: DFRobot

The TF03 is an industrial-grade ToF (Time-of-Flight) LiDAR sensor with a detection range of up to 180 m at 90% reflectivity. Using pulsed laser ranging at 905 nm, it delivers ±10 cm accuracy with a 0.1 m minimum blind...

SKU: DF-SEN0328 | Brand: DFRobot

The TF03 is an industrial-grade LiDAR sensor with a detection range of up to 100 m. Using pulsed time-of-flight (ToF) measurement, it delivers high accuracy in a compact 44 × 43 × 32 mm package weighing just 77 g. Its...

SKU: DF-SEN0264 | Brand: DFRobot

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...

SKU: DF-SEN0267 | Brand: DFRobot

The MB7789 4-20SC-MaxSonar-WRMI is a rugged, weather-resistant ultrasonic distance sensor with self-cleaning capability, designed for outdoor applications in high-moisture or condensation-prone environments. It provid...

SKU: DF-SEN0279 | Brand: DFRobot

The MB1414 USB-ProxSonar-EZ1 is an ultrasonic proximity and range sensor with a USB interface. It provides both proximity detection (target enter/exit a calibrated zone) and distance measurement with 1-inch resolution...