Industrial

SKU: DF-SEN0491 | Brand: DFRobot

This laser range sensor can be used to detect objects in 4~400cm with ±2cm accuracy. With 3 measurement modes supported, it is well applicable to various detection scenarios like security gate detection, access contro...

SKU: DF-DFR0909 | Brand: DFRobot

This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, up to 23 Relays and 6 Interrupts. It also contains several...

SKU: DF-DFR0908 | Brand: DFRobot

This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, and 6 Interrupts.It also contains several communication po...

SKU: DF-FIT0807 | Brand: DFRobot

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail in...

SKU: DF-DFR0905 | Brand: DFRobot

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs...

SKU: DF-DFR0904 | Brand: DFRobot

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 21 I/Os including 6 analog and digital inputs...

SKU: DF-DFR0901 | Brand: DFRobot

The 10 I/Os Relay Module with ESP32 is an industrial PLC that combines the connectivity of the ESP32 (Wi-Fi, Bluetooth LE, Ethernet, RS485) with relay outputs for switching higher-voltage loads. It provides a simple, ...

SKU: DF-DFR0899 | Brand: DFRobot

The 10 I/Os Relay Module is an industrial PLC based on the Arduino Nano with relay outputs for switching higher-voltage loads. It provides a simple, cost-effective, and open-source approach to industrial monitoring an...

SKU: DF-DFR0898 | Brand: DFRobot

The 10 I/Os PLC Module is an industrial programmable logic controller based on the Arduino Nano. It provides a simple, cost-effective, and open-source approach to industrial monitoring and control, with standardised P...

SKU: DF-FIT0751 | Brand: DFRobot

This 0.4 mm heat-resistant welding wire is built from seven 0.08 mm silver-plated copper conductors with a PFA insulation jacket. It handles temperatures from −60 °C to +250 °C, making it suitable for fine soldering w...

SKU: DF-FIT0853 | Brand: DFRobot

This M12 to RJ45 Ethernet adapter uses M12 female 4 pin D coded with IP67 waterproof rating, which is impervious to dust and short-term soaking, safe and reliable to use. There are metal shielding layers on the RJ45 p...

SKU: DF-FIT0770 | Brand: DFRobot

This is a background suppression photoelectric switch with 15mm-350mm adjustable detection range (can be adjusted by the knob). Its response time is only 0.5ms, fast and stable. Adopting eco-friendly and durable ABS m...

SKU: DF-FIT0759 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-DFR0684 | Brand: DFRobot

An industrial-grade RS485 expansion shield designed specifically for the LattePanda V1. This shield adds a reliable, isolated RS485 interface (via OPEN4) with comprehensive protection including signal isolation, power...

SKU: DF-DFR0734 | Brand: DFRobot

An industrial-grade RS232 expansion shield designed specifically for the LattePanda V1. Adds one RS232 port (D-Sub 9-pin male) with signal isolation, power isolation, and surge protection for reliable serial communica...

SKU: EC-WWF2232USR | Brand: Elecrow

This Serial WiFi module is you best choice for you to connect your application to the internet. It is a complete ultra low power embedded TCP/IP solution. It is a standalone, embedded wireless 802.11b/g networking mod...

SKU: EC-MCP00101P | Brand: Elecrow

This USBSerial Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can do many things such as used for programming(Arduino Pro Mini), debug some hardware...

SKU: AF-4660 | Brand: Adafruit

A rugged, chrome-plated latching pushbutton with a built-in RGB LED ring. Drill a 16 mm hole in any panel up to 6.35 mm (1/4") thick and mount it securely — an included rubber gasket provides a water-resistant seal fo...

SKU: DF-SEN0360 | Brand: DFRobot

F1031V Mass Air Flow Sensor adopts thermodynamic principle to detect flow rate of gas medium in the flow channel, with high precision and good repeatability. It comes with built-in temperature sensor to provide temper...

SKU: AF-4511 | Brand: Adafruit

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required - Just flick up the little levers and slide in your st...