Industrial

SKU: DF-SEN0586 | Brand: DFRobot

The LPB40B is a single-point ranging LiDAR sensor based on Direct Time-of-Flight (DToF) technology. It measures distances from 0.05 to 40 m on high-reflectivity targets, with ±5 cm accuracy across the full range. The ...

SKU: DF-DFR1058 | Brand: DFRobot

##Introduction Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC with industrial IoT capabilities. Opta is equipped with frequently used networks and protocols in multiple industr...

SKU: DF-DFR1057 | Brand: DFRobot

##Introduction Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC (Programmable Logic Controller) with industrial IoT capabilities. Opta is equipped with frequently used networks an...

SKU: AF-5994 | Brand: Adafruit

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get this-connected-to-that. It supports RS232 serial, TTL UART serial, RS485 and RS422. ...

SKU: WS-25116 | Brand: Waveshare

The UART-WIFI232-B2 is an industrial-grade embedded module that provides bidirectional transparent transmission between TTL serial (UART), WiFi (802.11b/g/n), and 100 Mbps Ethernet. It functions as a serial server, Mo...

SKU: DF-SEN0578 | Brand: DFRobot

This 2D single-line pulsed time-of-flight (ToF) LiDAR can realize the scanning measurement of the environmental profile within 270 degrees of the horizontal plane, with a precision of 2cm within a detection range of 0...

SKU: DF-SEN0576 | Brand: DFRobot

The LakiBeam 1S is an industrial-grade 2D single-line pulsed Time-of-Flight (ToF) LiDAR with a 270° scanning range and up to 15 m detection distance. With 2 cm precision, an 18,000 samples/second rate, and 100K LUX st...

SKU: SF-SEN-21334 | Brand: SparkFun

This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12. The lens produces a 5MP picture with a 18° field of view in a 1in image format and is easily interchangeable using the th...

SKU: DF-FIT0899 | Brand: DFRobot

This VESA mount is specially designed for LattePanda or other SBC cases. It can be used with VESA compatible display and monitor stand to hide the LattePanda or SBC behind the display, thus greatly reducing wire clutt...

SKU: AF-5498 | Brand: Adafruit

These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're very tactile, with a good clicky feel. And of course, the buil...

SKU: DF-FIT0874 | Brand: DFRobot

RS485 serial ports are often used to enable communication between PC and RS485 devices. This USB to RS485 serial cable with built-in a CH340 bus converter chip allows direct communication between PC and 485 device wit...

SKU: DF-SEN0505 | Brand: DFRobot

The TFmini-i is an industrial-grade single-point LiDAR sensor with a maximum detection range of 12 m. It uses Pulse Time of Flight (PTOF) measurement — emitting a narrow laser pulse and calculating the distance based ...

SKU: DF-DFR0903 | Brand: DFRobot

This Arduino-based Industrial PLC (Relay Output) features 8 inputs and 6 outputs(digital relay output). As it uses an Arduino Leonardo, you can directly program it through the USB, which is pretty easy to get sta...

SKU: DF-DFR0779 | Brand: DFRobot

This industrial-grade RS485 shield from DFRobot is specially designed to expand two parallel RS485 ports (terminal) with high reliability for LattePanda Alpha and LattePanda Delta. Employing FTDI USB to serial port ch...

SKU: DF-DFR0778 | Brand: DFRobot

An industrial-grade RS232 expansion shield designed for the LattePanda Alpha and LattePanda Delta. Adds a 9-pin D-Sub (DB9) male RS232 port using an FTDI USB-to-serial chip with an isolated transceiver module for reli...

SKU: DF-SEN0491 | Brand: DFRobot

This laser range sensor can be used to detect objects in 4~400cm with ±2cm accuracy. With 3 measurement modes supported, it is well applicable to various detection scenarios like security gate detection, access contro...

SKU: DF-DFR0909 | Brand: DFRobot

This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, up to 23 Relays and 6 Interrupts. It also contains several...

SKU: DF-DFR0908 | Brand: DFRobot

This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, and 6 Interrupts.It also contains several communication po...

SKU: DF-FIT0807 | Brand: DFRobot

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail in...

SKU: DF-DFR0905 | Brand: DFRobot

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs...