Industrial

SKU: WS-26244 | Brand: Waveshare

An RS485-controlled industrial I/O module with 8 isolated digital inputs and 8 open-drain digital outputs, communicating via the Modbus RTU protocol. Multiple protection layers — power isolation, magnetic isolation, T...

SKU: WS-25411 | Brand: Waveshare

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support ...

SKU: DF-SEN0482 | Brand: DFRobot

The wind direction sensor is a professional meteorological instrument used to measure horizontal wind direction. It integrates a hall sensor inside. The shell and weather vane is made of aluminum alloy material and us...

SKU: AF-3986 | Brand: Adafruit

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...

SKU: AF-917 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep wat...

SKU: SF-COM-10002 | Brand: SparkFun

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong frict...

SKU: WS-30795 | Brand: Waveshare

The Waveshare Modbus POE ETH Relay 16CH is an industrial-grade 16-channel relay module controlled over Ethernet using Modbus RTU or Modbus TCP protocol. It features dual Ethernet ports for cascading, Power over Ethern...

SKU: WS-23949 | Brand: Waveshare

The USB to RS485/422 is an industrial-grade isolated converter designed for reliable and stable communication. Featuring an original FT232RL chipset and SP485EEN transceiver, it ensures fast, interference-free data tr...

SKU: SF-COM-08890 | Brand: SparkFun

This is your standard fridge magnet, perfect for holding up quite a bit of weight. Grade C8, ceramic disk magnet. Magnetization is throughout the thickness of the magnet. We used this part with the SparkFun flame kits...

SKU: WS-24769 | Brand: Waveshare

Industrial 4G LTE Router, multiple VPN protocols support, 3-ch Ethernet Ports, WIFI high-speed internet access, dual Qualcomm chips Industrial 4G LTE Router Enhanced WiFi, 1WAN/LAN+2LAN  Supports multiple mode...

SKU: DF-FIT0821 | Brand: DFRobot

A 4-port RS-485 bus hub with optical isolation and surge protection, designed for industrial environments with complex electromagnetic interference. Each port is independently opto-isolated at 2500 V and protected aga...

SKU: DF-FIT0854 | Brand: DFRobot

This M12 to RJ45 Ethernet adapter uses M12 male 4 pin D coded with IP67 waterproof rating, which is impervious to dust and short-term soaking, safe and reliable to use. There are metal shielding layers on the RJ45 por...

SKU: DF-SEN0492 | Brand: DFRobot

This laser range sensor can be used to detect objects in 4~400cm with ±2cm accuracy. With 3 measurement modes supported, it is well applicable to various detection scenarios like security gate detection, access contro...

SKU: DF-SEN0438 | Brand: DFRobot

This industrial-grade RS485 temperature and humidity sensor features a high-precision digital transducer in a rugged aluminium alloy housing. With a wide measurement range and Modbus RTU communication, it's designed f...

SKU: AF-1297 | Brand: Adafruit

You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one here! This mount will fit any NEMA-17 motor (with 31mm hole...

SKU: AF-3424 | Brand: Adafruit

This chrome-plated rugged metal pushbutton features a built-in RGB LED ring light and a latching on/off mechanism. Press once to latch on, press again to release — unlike momentary buttons, it stays in position. Simpl...

SKU: DF-FIT0156 | Brand: DFRobot

A 40 mm red mushroom-head emergency stop push button switch. This momentary-action button fits a standard 22 mm mounting hole and is rated for up to 660V insulation voltage and 10 A thermal current — suitable for both...

SKU: DF-FIT0272 | Brand: DFRobot

The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS422/RS485 ports expansion via USB ...

SKU: SF-PRT-08534 | Brand: SparkFun

Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, a...

SKU: SF-COM-11971 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm thread...