Enclosures & Hardware

SKU: LB-LS7538 | Brand: Little Bird

A sturdy metal mounting bracket for servos, providing a stable platform for robotics and motion projects. Precision-cut mounting holes ensure secure servo installation for joints, linkages, arms, and custom assemblies...

SKU: AF-6433 | Brand: Adafruit

Keep your Adafruit MagTag safe and looking sharp with this custom-designed 3D-printed enclosure. The snap-together two-piece case accommodates all connection ports and features flexible push tabs for the four front bu...

SKU: AF-6241 | Brand: Adafruit

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer ...

SKU: AF-6308 | Brand: Adafruit

Perfect for a variety of small projects, these adhesive squares provide a strong bond to most surfaces and are an excellent way to attach heat sinks to a chip.Each tab is 0.5" (12.7mm) square and 1.25mm thick. You get...

SKU: DF-FIT0968 | Brand: DFRobot

##Introduction This Expandable case is a high-quality expandable enclosure designed specifically for the LattePanda Sigma Single Board Computer Server. It offers convenient installation for various non-standard M.2 ex...

SKU: DF-FIT0969 | Brand: DFRobot

An aluminium M.2 2280 SSD heatsink with a heat pipe and passive fin design for high-performance thermal management. The 32 aluminium fins provide a total heat dissipation area of 4,500mm², delivering 10–30°C of coolin...

SKU: DF-FIT0949 | Brand: DFRobot

An all-metal aluminium alloy enclosure designed specifically for the LattePanda Sigma single board computer. Features a bright black anodised finish with sandblasting for a scratch-resistant, professional appearance. ...

SKU: DF-FIT0945 | Brand: DFRobot

##Introduction This meticulously crafted metal enclosure is specifically designed for the LattePanda 3 Delta Single Board Computer. The enclosure fully wraps around the entire LattePanda 3 Delta, including the mainboa...

SKU: DF-FIT0946 | Brand: DFRobot

A fanless aluminium alloy enclosure designed specifically for the LattePanda 3 Delta single board computer. The case acts as a passive heatsink, with the aluminium shell providing excellent thermal conductivity to kee...

SKU: SF-BOB-25069 | Brand: SparkFun

The Macchina OBD-II 3-Way Breakout Board simplifies OBD2 device development by splitting a single OBD2 port into three accessible connectors with flexible signal routing. Junction blocks let you reroute individual OBD...

SKU: WS-29417 | Brand: Waveshare

The Luckfox Pico WebBee is a compact Linux development board built around the Rockchip RV1103 chip, combining an ARM Cortex-A7 core clocked at 1.2GHz with a RISC-V MCU. It comes bundled with a custom ABS protective ca...

SKU: AF-6183 | Brand: Adafruit

Here is a cute, minimal snap-on mount for your QT Py to keep it safe during use and transport. It has been custom-designed and 3D printed to accommodate the USB-C connector, along with four M3 mounting holes. No screw...

SKU: AF-6126 | Brand: Adafruit

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate al...

SKU: AF-6124 | Brand: Adafruit

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves toge...

SKU: AF-6114 | Brand: Adafruit

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and...

SKU: AF-6054 | Brand: Adafruit

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape nee...

SKU: SF-COM-25893 | Brand: SparkFun

This is a 5mm right angle light pipe to get the light of an LED out the end plate of an enclosure. We couldn't find a light pipe that fit all our needs, so we made it! This clip snaps over any SMD LED that is 1206 siz...

SKU: AF-6015 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: AF-6002 | Brand: Adafruit

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simpl...

SKU: AF-5998 | Brand: Adafruit

Here is a cute and minimal enclosure for your Pixel Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button, 3-pin JST SH port, and the 4 ter...