Enclosures & Hardware

SKU: SF-KIT-24115 | Brand: SparkFun

Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware sizes, M3 and M2.5, with a mix of standoff heights, nuts, scre...

SKU: SF-PRT-10316 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for lifting a PCB off the bench or mounting a board neatly inside an enclosure.It is 3/8" long and tapped for a 4-40 screw, making it handy for projects that use common ...

SKU: SF-PRT-26989 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for raising a PCB off a surface or mounting it neatly inside an enclosure. It is tapped for a 4-40 screw and measures 3/4" long.Use it to give your board clearance from ...

SKU: AF-6044 | Brand: Adafruit

Add motion to LEGO-compatible brick builds without relying on hot glue, epoxy or guesswork. This resin-printed mounting piece is designed to hold Adafruit '9g' micro servos and micro-servo-sized DC motors securely for...

SKU: AF-6360 | Brand: Adafruit

This SmartiPi Touch Pro 3 enclosure is designed for the Raspberry Pi Touch Display 2, giving your touchscreen project a tidy, mountable case with room inside for extra hardware. It is compatible with Raspberry Pi 3, 4...

SKU: LB-PT2019B | Brand: Little Bird

The Armour Case for Raspberry Pi 4 is CNC machined out of Aluminium and acts as a giant heat sink that cools down your Raspberry Pi! The open dual fan design keeps air moving across the Raspberry Pi with little noi...

SKU: LB-PT22033-S | Brand: Little Bird

Passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heatsink design on top and passively cools the Pi using embedded so...

SKU: LB-PT91039 | Brand: Little Bird

Great for Arduino and Raspberry Pi!Package Included: 10 x Copper female-Female seat (M3 * 20 mm) 10 x Copper female-Female seat (M3 * 30 mm) 10 x Copper male-Female seat (M3 * 10 +6 mm) 10 x Copper male and femal...

SKU: PH-102633 | Brand: PiHut

A premium aluminium case for the Raspberry Pi Zero with a built-in heatsink core for silent, passive cooling. Shares the same design DNA as the original FLIRC case — shrunk down with added features that make the Pi Ze...

SKU: LB-LR0561 | Brand: Little Bird

A transparent acrylic enclosure designed for the Raspberry Pi 3 with a 3.5-inch LCD touchscreen display mounted on top. The case provides protection for the board and display while keeping all ports accessible. Key F...

SKU: MP-MMP-0419-(BLACK) | Brand: Little Bird

A professional, fully injection-moulded case for the Raspberry Pi Zero. The three-part clip-together construction (top, base, and micro SD card cover) provides solid protection while maintaining full access to all por...

SKU: PH-105840 | Brand: PiHut

The Argon NEO 5 M.2 NVMe Case is a premium aluminium enclosure for the Raspberry Pi 5 with built-in M.2 NVMe SSD support via the Pi 5's PCIe header. Add fast NVMe storage and boot directly from an M.2 drive, all withi...

SKU: YH-6000300963 | Brand: Little Bird

This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone. T...

SKU: PR-PIM296 | Brand: Little Bird

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: AF-3597 | Brand: Adafruit

This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it for sure with the Arduino UNO R3, Adafruit Metro and Adafruit Metro Express. It's clear so you can see all ...

SKU: PL-2693 | Brand: Pololu

These universal mounting hubs are designed to work with most 8 mm diameter shafts, including round shafts and “D” shafts. Each of the two included hubs has six mounting holes for M3 screws (not included), letting y...

SKU: PI-COM2101 | Brand: Pimoroni

Specifically selected for Pi HATs and pHATs this standoff selection also includes male to female standoffs to allow you to stack your boards securely Contents 4 x 10mm M2.5 F-F standoff 4 x 10mm M2.5 M-F stando...

SKU: PI-COM2100 | Brand: Pimoroni

Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/p...

SKU: ET-3106158 | Brand: Little Bird

Note: This enclosure is for the V1 official touchscreenRaspberry Pi 4 black colour case assembly; a high quality ABS enclosure designed specifically for Raspberry Pi 4 Model B and official touchscreen to be use...

SKU: DF-FIT0776 | Brand: DFRobot

This a metal case for Low profile ICE Tower Cooler. It is fit for Raspberry Pi 4B. Not only does it provide good protection for your Raspberry Pi, but the installed fan can also effectively dissipate heat. The sh...