Enclosures & Hardware

SKU: SF-PRT-10453 | Brand: SparkFun

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-TOL-12783 | Brand: SparkFun

A 1ft (30cm) flexible coolant pipe with articulating segments that hold their position when bent. Originally designed for directing coolant or washing fluid on machine tools, these pipes are also popular with makers a...

SKU: SF-PRT-10114 | Brand: SparkFun

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snug...

SKU: DF-FIT0475 | Brand: DFRobot

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card, GPIO and anten...

SKU: AF-761 | Brand: Adafruit

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how to keep an enclosure weather/waterproof while still attaching cab...

SKU: AF-2013 | Brand: Adafruit

Add knobs to your grid with this add-on accessory for the HELLA UNTZtrument. This is a replacement piece of laser cut acrylic to use when building an Adafruit HELLA UNTZtrument It's perfect for adding a rotary enco...

SKU: DF-FIT0060 | Brand: DFRobot

A 10-pack of M3 × 5mm mounting screws with matching nuts. A staple for securing circuit boards, sensors, and mechanical components in electronics projects. Key Features M3 Thread – Standard M3 size compatible with ...

SKU: DF-FIT0061 | Brand: DFRobot

A 10-pack of M3 × 8mm mounting screws with matching nuts. A staple for securing circuit boards, sensors, and mechanical components in electronics projects. Key Features M3 Thread – Standard M3 size compatible with ...

SKU: DF-FIT0063 | Brand: DFRobot

A 10-pack of M3 × 10mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent spacing and secure mechanical support. Standoffs are ideal for...

SKU: DF-FIT1029 | Brand: DFRobot

This aluminium enclosure is designed specifically for the LattePanda IOTA, combining a rugged protective case with a large passive heatsink. The whole case body helps draw heat away from the processor, supporting sust...

SKU: DF-FIT0943 | Brand: DFRobot

This aluminium heatsink kit is designed specifically for the ROCK Pi 4SE single-board computer, helping draw heat away from the board for more stable operation.The large metal heatsink provides efficient passive cooli...

SKU: DF-FIT1020 | Brand: DFRobot

This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is m...

SKU: DF-FIT1016 | Brand: DFRobot

This durable, lightweight plastic cover is designed to protect the front screen of the UNIHIKER M10 single-board computer from everyday wear and accidental bumps or drops.It integrates with the UNIHIKER portable expan...

SKU: AF-5779 | Brand: Adafruit

This swirly aluminium mounting grid gives small maker boards a sturdy mechanical base when you are building plug-and-play projects with STEMMA QT boards, sensors, Feathers and other 0.1 inch-spaced PCBs.It is made usi...

SKU: SF-SPX-24673 | Brand: SparkFun

This replacement housing kit provides the enclosure and small parts needed to repair an RTK Facet unit. It is intended for users who need to replace a damaged housing and are comfortable following the device disassemb...

SKU: AF-6409 | Brand: Adafruit

Keep your Adafruit USB Type-C CC Resistor Fixer protected during use and transport with this cute, minimal snap-on enclosure. It has been custom-designed and 3D printed to suit the board and its peripherals.No screws ...

SKU: AF-6402 | Brand: Adafruit

Keep your Adafruit TPS61169 Constant Current Boost Converter for LEDs protected during use and transport with this compact snap-on enclosure. It has been custom-designed and 3D printed to fit the breakout and its surr...

SKU: AF-6013 | Brand: Adafruit

Keep your Pixel Trinkey protected in use and during transport with this cute, minimal clear enclosure. It has been custom-designed and 3D printed to fit the Pixel Trinkey neatly.The case accommodates the reset button,...

SKU: AF-6301 | Brand: Adafruit

This cute, minimal enclosure is designed to help keep your compatible Adafruit Sparkle Motion board safe during use and transport. It has been custom-designed and 3D printed to accommodate the board’s peripherals.No s...

SKU: AF-6305 | Brand: Adafruit

Keep your Adafruit Feather RP2350 with HSTX Port protected during use and transport with this cute, minimal enclosure. It has been custom-designed to fit the Feather RP2350 HSTX board, including the version with 8MB o...