Enclosures & Hardware

SKU: EL-MP014888 | Brand: Jaycar

A black ABS enclosure designed specifically for the Raspberry Pi 5 with a 7″ touchscreen display. Manufactured in the UK, it features precision cut-outs for all connections and dedicated ventilation slots for efficien...

SKU: AF-5774 | Brand: Adafruit

The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards tog...

SKU: YH-6000300953 | Brand: Little Bird

A protective silicone case designed for the BBC micro:bit, compatible with both V1.5 and V2 boards. Precision-cut openings provide full access to the 5×5 LED matrix, A/B buttons, edge connector pins, and all V2 featur...

SKU: AF-3949 | Brand: Adafruit

A compact steel ball caster that provides smooth, omnidirectional movement for small robots and wheeled projects. With a 16mm overall height, it's well-suited as a third support point for two-wheeled robot chassis. E...

SKU: AF-3700 | Brand: Adafruit

A candy-coloured zipper case that's the perfect size for makers on the go. Instead of tossing your Raspberry Pi or Metro M0 Express into the abyss of your backpack, keep it safe and organised in this compact pouch. S...

SKU: AF-1493 | Brand: Adafruit

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissi...

SKU: TB-HB6015 | Brand: Little Bird

Manufactured from ABS plastic, these jiffy boxes not only look great, they have been designed to incorporate everything our customers wanted in a constructor's box. Sizes are compliant with industry standards ...

SKU: AF-2174 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a bevelled finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The bevelled ...

SKU: AF-2336 | Brand: Adafruit

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These...

SKU: AF-2429 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: SF-COM-09278 | Brand: SparkFun

It’s not what project you have in mind that may use a rocket launch switch… The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch.The hot red safety ...

SKU: DF-FIT0191 | Brand: DFRobot

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...

SKU: SF-PRT-08433 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal ca...

SKU: SF-COM-11841 | Brand: SparkFun

A snap-in plastic LED holder designed for 10 mm LEDs. Simply press the LED into the holder and snap the assembly into a 35/64″ (approximately 14 mm) panel hole — no screws or tools required. Key Features Snap-In De...

SKU: DF-FIT0991 | Brand: DFRobot

The Argon NEO 5 BRED is a polished aluminium case for the Raspberry Pi 5, combining passive heatsink cooling with an integrated active cooling fan. Cold air enters through intake vents and the fan circulates airflow t...

SKU: AF-5019 | Brand: Adafruit

These 1mm thick double-sided foam tapes are perfect for a variety of small projects. These adhesive rectangles provide a strong bond to most surfaces and are cleaner and easier to remove witho...

SKU: AF-4553 | Brand: Adafruit

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum,...

SKU: LB-MAKER-16 | Brand: Little Bird

A compact zip-up carry case sized perfectly for makers on the move. Large enough for a Raspberry Pi, Arduino, or micro:bit with a shield attached, with an interior pocket for cables, probes, jumper wires, batteries, a...

SKU: AF-1434 | Brand: Adafruit

A two-piece adjustable mount from Pimoroni for the Raspberry Pi Camera Module. The design allows multiple angle positions and includes a 1/4"-20 threaded hole for attaching to a standard camera tripod. Compatible wit...

SKU: AF-1467 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...