Elecrow

SKU: EC-ACS95915S | Brand: Elecrow

The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It...

SKU: EC-RPA01416L | Brand: Elecrow

This RGB LED HAT adds a 4×8 matrix of individually addressable RGB LEDs to your Raspberry Pi. With 256 brightness levels and 24-bit colour depth (over 16.7 million colours), it's perfect for creating colourful display...

SKU: EC-CEF02096C | Brand: Elecrow

If you want to connect Raspberry Pi which has only one single micro port to various USB, the USB Hub for Raspberry Pi Zero is your right choice. Especially there is no soldering and wires reqiured. The USB Hub for RPI...

SKU: EC-DIS01835A-3 | Brand: Elecrow

The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction v...

SKU: EC-CDP03051C | Brand: Elecrow

The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper mo...

SKU: EC-MCA03328A | Brand: Elecrow

The Crowduino Nano V3.1 is a compact, breadboard-friendly development board based on the ATmega328, fully compatible with the Arduino Nano 3.0 and its shields. It features a Mini-B USB port for programming and serial ...

SKU: EC-SEL71220A | Brand: Elecrow

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...

SKU: EC-SEA0001T | Brand: Elecrow

The Crowtail Starter Kit for Arduino is a beginner-friendly electronics kit built around the Crowduino Uno-SD board and the Crowtail modular connector system. With 22 plug-and-play modules and over 20 guided tutorials...

SKU: EC-DPO01117E | Brand: Elecrow

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate ...

SKU: EC-ACS70028DH | Brand: Elecrow

The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor control...

SKU: EC-DRA09012K | Brand: Elecrow

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapte...

SKU: EC-DIY19560P | Brand: Elecrow

This compact brushless submersible pump operates on 3.5–9V DC via a USB connector, making it easy to power from a USB power bank, solar panel, or development board. It delivers up to 200L/h flow and can push water up ...

SKU: EC-CRF19969D | Brand: Elecrow

AS01-ML01DP5 is a 2.4GHZ100mW, high speed (maximum air speed up to 2Mbps) high stability, industrial grade wireless transceiver integrated digital transmission module. Module uses nRF24L01P RF chip and RFX2401C power ...

SKU: EC-MCS01584R | Brand: Elecrow

The Relay Shield v1.1 is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled ...

SKU: EC-ACS02453S | Brand: Elecrow

Arduino Mega ProtoShield V3.0 use with Arduino MEGA to build circuit. You can soldering the components on this shield and also you can set up circuit through the mini breadboard.Arduino Mega ProtoShield V3.0 adopts th...

SKU: EC-RPA08067R | Brand: Elecrow

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI display with high-res, high-contrast visibility. The display is very easy to use - simply c...

SKU: EC-SES14002K | Brand: Elecrow

CrowPi is an educational tool based on Raspberry Pi, designed to help people learn electronics, programming, and basic computer science. CrowPi was first released on Kickstarter in May 2018 and won a very successful c...

SKU: EC-SER14003P1 | Brand: Elecrow

The CrowPi 3 is an all-in-one portable programming lab with 41 built-in sensors and modules, a 4.3-inch touchscreen, and support for multiple development boards. Compatible with Raspberry Pi 5, micro:bit, Raspberry Pi...

SKU: EC-TET01980T | Brand: Elecrow

A comprehensive collection of 24 types of commonly used Arduino connectors, all in one convenient kit. Includes male and female headers, USB connectors, switches, DC jacks, SD/TF card sockets, and more — everything yo...

SKU: EC-PCW10301C | Brand: Elecrow

This is a Type-B USB cable, which is compatible with Arduino Uno. It's a 3m cable and long enough for normal use.