Elecrow

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: EC-CIL12901M-1 | Brand: Elecrow

ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enab...

SKU: EC-CRV15624T-004 | Brand: Elecrow

A super-thin 15.6" portable IPS touchscreen monitor with 1920×1080 resolution and 100% sRGB colour gamut. The aluminium alloy shell is just 5 mm thick with 6 mm screen bezels, making it easy to carry alongside a lapto...

SKU: EC-DISSF116P | Brand: Elecrow

An 11.6-inch 1920×1080 IPS touchscreen monitor with HDMI and VGA inputs. The 10-point capacitive touch panel is plug-and-play over USB — no drivers required. Built-in dual speakers, a 3.5mm headphone jack, and a 3.5mm...

SKU: EC-DIS10411D | Brand: Elecrow

You can use your tablets as a second or third display with this side mount clip, this clip can clamp your tablet or cell phone to your laptop to extend your screen and get multi-display experience. It is a must-have f...

SKU: EC-SEM00006D | Brand: Elecrow

The All-in-one Starter Kit for Micro:bit is a beginner-friendly learning platform that integrates 13 sensor modules on a single circuit board — no soldering or wiring required. Simply plug in your micro:bit and start ...

SKU: EC-PMMA19005G | Brand: Elecrow

A DC 12 V four-way solenoid valve with one inlet and four independently controlled outlets. Each outlet has its own control wire, so you can open any combination of the four channels — use one at a time or all four si...

SKU: EC-DRD60311D | Brand: Elecrow

An 11.6-inch 1920×1080 IPS LED display with HDMI input and a brushed aluminium housing. The full HD resolution and wide 170° viewing angle deliver a clear, vivid picture from almost any position. The display includes ...

SKU: EC-RAP59820P | Brand: Elecrow

This time Raspberry Pi Foundation developed a powerful device Raspberry Pi Pico that is powered by micro-controller RP2040. It is a compact microcontroller board that would make the work easier for the users which ...

SKU: EC-CRV12014K-1 | Brand: Elecrow

The Elecrow CrowView Note is a 14" laptop-style portable monitor that turns your single-board computer, smartphone, or mini PC into a complete workstation. With an integrated IPS display, full keyboard, touchpad, ster...

SKU: EC-ASW51001E | Brand: Elecrow

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up...

SKU: EC-ACC05010A | Brand: Elecrow

This 1.5-meter-long wire will perfectly match the input port of your raspberry pi 4! Support transfer 720P/1080i/1080P Full HD 4K 60Hz high-definition video.High-quality material, 24K gold-plated connector, strong cor...

SKU: EC-AAK39525K | Brand: Elecrow

The Starter Kit for Arduino is an excellent kit for whom want to learn more about Arduino. This kit include display part, 5 kinds of sensors (vibration sensor, touch sensor, flame sensor, DHT11 Temperature and humi...

SKU: EC-DIS04028H | Brand: Elecrow

CrowPanel ESP32 Display 2.8-inch SPI module is a powerful HMI touch screen with a 320*240 resolution LCD display. It uses the ESP32-WROOM-32 module as the main control processor, with a dual-core 32-bit LX6 microproce...

SKU: EC-DPO02102N | Brand: Elecrow

The NodeMCU R2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module), featuring a CP2102 USB-to-UART bridge for reliable programming and debugging. It integrates GPIO, PWM, I2C, 1-Wire, and ADC on a singl...

SKU: EC-ACS95915S | Brand: Elecrow

The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It...

SKU: EC-RPA01416L | Brand: Elecrow

This RGB LED HAT adds a 4×8 matrix of individually addressable RGB LEDs to your Raspberry Pi. With 256 brightness levels and 24-bit colour depth (over 16.7 million colours), it's perfect for creating colourful display...

SKU: EC-CEF02096C | Brand: Elecrow

If you want to connect Raspberry Pi which has only one single micro port to various USB, the USB Hub for Raspberry Pi Zero is your right choice. Especially there is no soldering and wires reqiured. The USB Hub for RPI...

SKU: EC-DIS01835A-3 | Brand: Elecrow

The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction v...

SKU: EC-CDP03051C | Brand: Elecrow

The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper mo...