Displays

SKU: AF-2279 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 3mm pitch features 2048 bright RGB LEDs in a 192×96mm panel. With tighter pixel spacing than 4mm and 5mm variants, this panel delivers sharp images for indoor viewing at moderate di...

SKU: AF-2454 | Brand: Adafruit

The Adafruit DPI TFT Kippah connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. The result is a fast, native 18-bit colour display with full g...

SKU: AF-2453 | Brand: Adafruit

The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen cap...

SKU: DF-DFR0091 | Brand: DFRobot

A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the ...

SKU: DF-DFR0090 | Brand: DFRobot

An 8-digit serial LED display module that uses an SPI (3-wire) interface, requiring only three I/O pins from your Arduino or microcontroller. Multiple modules can be daisy-chained together for longer displays. The fli...

SKU: DF-DFR0130-G | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: DF-DFR0130-R | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: AF-2674 | Brand: Adafruit

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...

SKU: AF-2675 | Brand: Adafruit

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...

SKU: SF-COM-08530 | Brand: SparkFun

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric...

SKU: DF-DFR0244-G | Brand: DFRobot

A panel-mount LED current meter that measures 0–9.99 A DC with 2% accuracy. The bright green 3-digit LED display is easy to read, and the meter requires no external circuitry — just connect four wires and it gives a r...

SKU: DF-DFR0245-G | Brand: DFRobot

This panel-mount LED current meter displays DC current readings from 0 to 50A on a bright green 3-digit LED display. It features reverse connection protection to prevent damage, and requires just four wires to install...

SKU: DF-DFR0245-R | Brand: DFRobot

This is a standard LED Current Meter 50A. The biggest feature is that the LED Current Meter have reversed connection protection to prevent from being burnted out. It measures 0-50A with 2% error. Best suitable...

SKU: DF-DFR0244-B | Brand: DFRobot

This is a standard LED Current Meter 10A. It measures 0-9.99A with 2% accuracy. Best suitable for current display in the circuit.Just apply four wires without any extra circuit or components, it gives the reading s...

SKU: DF-DFR0244-R | Brand: DFRobot

This is a standard LED Current Meter 10A. It measures 0-9.99A with 2% accuracy. Best suitable for current display in the circuit.Just apply four wires without any extra circuit or components, it gives the reading s...

SKU: SF-LCD-00710 | Brand: SparkFun

A framed 128 × 64 pixel graphical LCD with LED backlight. This STN-type display provides clear, high-contrast graphics and text output using the widely supported KS0108B parallel interface chipset. The module includes...

SKU: DF-FIT0328 | Brand: DFRobot

A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the disp...

SKU: AF-3088 | Brand: Adafruit

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two sha...

SKU: AF-3089 | Brand: Adafruit

The Adafruit 14-Segment Alphanumeric LED FeatherWing adds a bright 4-digit alphanumeric display to any Feather board. The 0.56" 14-segment LEDs can display the full alphabet, numbers, and punctuation — readable from u...

SKU: AF-3090 | Brand: Adafruit

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just tw...