Displays

SKU: SF-COM-11442 | Brand: SparkFun

The SparkFun 7-Segment Serial Display combines a 4-digit 7-segment LED display with an ATmega328 microcontroller, allowing you to control every segment using just a few serial lines. It supports three communication in...

SKU: AF-292 | Brand: Adafruit

LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons ...

SKU: AF-453 | Brand: Adafruit

When you need some help driving a lot of LEDs, the MAX7219 is the best friend you could hope for. Many of us know that if you want to control a lot of LEDs, you'll want to use multiplexing, a technique that lets you c...

SKU: DF-DFR0376 | Brand: DFRobot

INTRODUCTION OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 sc...

SKU: AF-1813 | Brand: Adafruit

A 10-segment LED bar graph display in a warm amber colour. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, ...

SKU: AF-1923 | Brand: Adafruit

A 10-segment LED bar graph display in yellow-green. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even gl...

SKU: AF-1932 | Brand: Adafruit

A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for...

SKU: DF-FIT0477 | Brand: DFRobot

This 7" IPS display is designed specifically for the LattePanda single board computer. Simply connect it via the MIPI FPC connector and power your LattePanda — no extra power cables required. The display border is ins...

SKU: DF-FIT0478 | Brand: DFRobot

This capacitive touch panel overlay adds touch input to your LattePanda 7" IPS Display (sold separately). Simply apply the adhesive panel over the display, connect the FPC cable, and power the board for a complete tou...

SKU: DF-FIT0476 | Brand: DFRobot

A 10.1" IPS display with 1280 × 800 resolution and HDMI, VGA, and composite (AV) inputs, designed for use with the LattePanda, Raspberry Pi, and other mini PCs. The wide compatibility and high brightness make it suita...

SKU: DF-DFR0462 | Brand: DFRobot

Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Ardui...

SKU: AF-881 | Brand: Adafruit

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in blue makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so yo...

SKU: AF-3533 | Brand: Adafruit

The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SP...

SKU: DF-FIT0021 | Brand: DFRobot

A 128×64 pixel graphic LCD module driven by the ST7920 controller. This display supports English characters, Chinese characters, and custom graphics over both serial (SPI) and parallel interfaces, making it a versatil...

SKU: DF-DFR0487 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the Io...

SKU: AF-333 | Brand: Adafruit

A 4-wire resistive touch screen digitiser (originally designed for the Nintendo DS Lite) that works with a stylus or fingertip. It can be used with any microcontroller that has 2 digital pins and 2 analogue input pins...

SKU: LB-LR0122 | Brand: Little Bird

This module consists of 64 LEDs with MAX7219 driver chip. It can control 64 LEDs by 16-bit data serial input and output. If you want to control it, you only need to control three IO ports. It support for cascading mul...

SKU: EC-CRV12014K-CRV12414P | Brand: Elecrow

The CrowView Note is a laptop-style portable monitor with an integrated 14" display, keyboard, touchpad, speakers, and 5000mAh battery. Connect it to smartphones, Raspberry Pi, Jetson Nano, mini PCs, or gaming console...

SKU: AF-6415 | Brand: Adafruit

This 7.5" tri-colour e-ink bare display features 800×480 pixels in red, black, and white. E-paper displays are daylight-readable, ultra-low power, and retain their image even when completely depowered — ideal for batt...

SKU: AF-6414 | Brand: Adafruit

This 3.52" quad-colour eInk display delivers four distinct ink colours — red, black, yellow, and white — at 340×180 pixel resolution. The display retains its image with no power draw, offering the paper-like readabili...