DFRobot

SKU: DF-FIT0861 | Brand: DFRobot

A set of five solderless snap-down connectors for joining 10 mm wide, 3-wire LED strips without soldering. Simply align the strip's copper pads with the connector contacts and snap the cover down for a firm electrical...

SKU: DF-FIT0867 | Brand: DFRobot

A set of five solderless right-angle connectors for joining 10 mm wide, 3-wire LED strips at 90° corners. Each connector has snap-down contacts on both ends with colour-labelled wires and marked polarity for easy, too...

SKU: DF-SEN0378 | Brand: DFRobot

The VL53L3CX is the latest Time-of-Flight (ToF) product from STMicroelectronics and embeds ST’s third-generation FlightSense technology. With the improved detection accuracy, the sensor features a 25~3000mm sensing ra...

SKU: DF-DWG0014-M | Brand: DFRobot

This is a PCB engineering ruler used daily by DFRobot electronic engineers, the short PCB ruler is only the size of the palm of your hand, making it more delicate and compact, and easy to carry. The information on the...

SKU: DF-DFR0803 | Brand: DFRobot

A HiFi digital power amplifier board with Bluetooth 5.0 and AUX input, delivering 50W per channel in a dual-channel configuration. With AM interference suppression and filtering, the board achieves THD as low as 0.1% ...

SKU: DF-FIT0720 | Brand: DFRobot

These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with c...

SKU: DF-SEN0368 | Brand: DFRobot

A non-contact capacitive liquid level sensor that detects whether liquid is present inside a non-metallic container or pipe without direct contact with the fluid. It works by measuring changes in capacitance through t...

SKU: DF-SEN0331 | Brand: DFRobot

This DFRobot SHT31 digital temperature and humidity sensor is based upon the Sensirion SHT31 sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap ...

SKU: DF-FIT0614 | Brand: DFRobot

Nowadays, LED strip is becoming more and more prevalent in our daily life. Sometimes, especially in festival days, we even feel that there are no more fun and excitement without it. How about getting a cool LED str...

SKU: DF-FIT0610 | Brand: DFRobot

This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...

SKU: DF-MBT0011 | Brand: DFRobot

A double-sided line-tracking map designed for the micro:Maqueen robot. The front features a figure-8 track and the back has an ellipse track, both with clear black lines for reliable sensor detection. Made from durabl...

SKU: DF-SEN0262 | Brand: DFRobot

This current-to-voltage module can linearly convert 0~25mA current signals into 0~3V voltage signals. Industrial sensors or devices usually have the current signal output of 4~20 mA. With this current-to-voltage mo...

SKU: DF-FIT0007 | Brand: DFRobot

A sturdy metal ball caster made from 1 mm stamped steel plate, capable of supporting loads up to 15 kg. At just 37 g and 20 mm tall, it provides smooth omnidirectional movement without adding significant weight to you...

SKU: DF-SEN0230 | Brand: DFRobot

This is an industrial incremental photoelectric rotary encoder with aluminum material, metal shell and stainless steel shaft. It generates AB two-phase orthogonal pulse signal though the rotation of the grating dis...

SKU: DF-DFR0464 | Brand: DFRobot

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compa...

SKU: DF-FIT0085 | Brand: DFRobot

This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on...

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...

SKU: DF-FIT0521 | Brand: DFRobot

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds ...

SKU: DF-FIT0121 | Brand: DFRobot

Jumper wires are one of the most important gear component for the tinkerer. Often underestimated, but one of the first things to miss. If you are starting to assemble your tinker gear and wondering if this is really n...

SKU: DF-SEN0129 | Brand: DFRobot

INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smok...