DFRobot

SKU: DF-TEL0185 | Brand: DFRobot

Introduction RainbowLink is a high-performance USB protocol converter designed for multi-channel serial communication and power output, making it ideal for IoT and industrial applications. It integrates four independe...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: DF-DFR0959 | Brand: DFRobot

Designed by Raspberry Pi, RP2040 features a dual-core ARM Cortex-M0+ processor with up to 133MHz clock and 264KB internal RAM, and supports USB 1.1 devices, which allows users to focus on function implementation inst...

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: DF-DFR1056 | Brand: DFRobot

Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...

SKU: DF-SEN0570 | Brand: DFRobot

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...

SKU: DF-SEN0567 | Brand: DFRobot

Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: DF-DFR0979 | Brand: DFRobot

The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...

SKU: DF-SEN0551 | Brand: DFRobot

This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference a...

SKU: DF-SEN0522 | Brand: DFRobot

This human body sensing switch adopts an infrared detection way to control load switch. It offers a detection range of 5~8m, high sensitivity, and reliability.&nbsp;The sensor has an adjustable delay function and the ...

SKU: DF-SEN0501 | Brand: DFRobot

This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmen...

SKU: DF-TEL0140 | Brand: DFRobot

A simple 433 MHz RF wireless switch set that transmits digital signals between a transmitter and receiver module. Based on Gravity interface connectors, it works with any microcontroller that can read and write digita...

SKU: DF-SEN0487 | Brand: DFRobot

This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...

SKU: DF-DFR0806 | Brand: DFRobot

With bass and treble tone independent control, this powerful Bluetooth Amplifier has AM interference and filtering function that makes the board THD as low as 0.1% even when working for a long time at large power outp...

SKU: DF-FIT0864 | Brand: DFRobot

These solderless 4-pin snap-down connector cables make it easy to bridge a gap between two pieces of cuttable RGB LED strip without soldering. Each cable has a snap-down connector on both ends with a wire in between, ...

SKU: DF-SEN0403 | Brand: DFRobot

DFRobot TCS3430 XYZ Tristimulus Color Sensor employs the new generation of TCS3430 spectral sensor IC launched by the well-known AMS company. It features advanced digital ambient light sensing(ALS) and CIE 1931 tristi...

SKU: DF-FIT0719 | Brand: DFRobot

This NEO case is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B. Made with aluminum alloy and polished with a modem Space Grey finish for stunning aesthetics.The case acts as passi...

SKU: DF-FIT0689 | Brand: DFRobot

This 10 cm FPC flat-flex ribbon cable is designed for use with DFRobot GDI (General Display Interface) displays. The 18-pin reverse-contact cable is durable and resistant to damage even when bent sharply, with insulat...

SKU: DF-FIT0652 | Brand: DFRobot

A tower-style CPU cooler for the Raspberry Pi, combining a 5mm copper heatpipe, multi-layer aluminium heat sinks, and a 7-blade fan to significantly reduce operating temperatures. Under overclocking conditions, it can...

SKU: DF-DFR0588 | Brand: DFRobot

Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sens...