Components

SKU: AF-383 | Brand: Adafruit

A 40-pin Zero Insertion Force (ZIF) socket for DIP chips up to 0.6″ wide. The lever-operated mechanism allows chips to be inserted and removed without bending pins, making it ideal for chip programmers, testing, and a...

SKU: AF-3103 | Brand: Adafruit

Sometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Luckily we've found a low cost, quality PSP 3000 2-Axis Analog Thumb...

SKU: AF-403 | Brand: Adafruit

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. Yo...

SKU: AF-405 | Brand: Adafruit

A 2.5 m length of high-brightness orange electroluminescent (EL) wire, pre-cut and pre-soldered with a standard quick-connect plug. This 2.6 mm diameter wire uses the latest phosphor technology to produce twice the br...

SKU: AF-407 | Brand: Adafruit

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You c...

SKU: AF-306 | Brand: Adafruit

These LED strips are fun and glowy. There are 32 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each ...

SKU: SF-COM-10931 | Brand: SparkFun

A basic 4-digit 7-segment display in white. This common anode display features one decimal point per digit, plus individually controllable apostrophe and colon points — perfect for clocks, counters, and numeric readou...

SKU: SF-COM-13105 | Brand: SparkFun

So much power and light from such a small package. This 5 pack of “Cool” white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these l...

SKU: SF-COM-13104 | Brand: SparkFun

So much power and light from such a small package. This 5 pack of “Warm” white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these litt...

SKU: SF-COM-10924 | Brand: SparkFun

These are massive single pole - double throw (SPDT) sealed relays. This means that when current is applied to the coil it throws a simple changeover switch, terminating the connection from the NC contact to ground and...

SKU: AF-420 | Brand: Adafruit

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate usi...

SKU: SF-BOB-13099 | Brand: SparkFun

The SparkFun Rotary Switch Potentiometer Breakout is a small board the allows you to add resistors to a 10-position rotary switch, turning it into a potentiometer with 10 discrete steps. Multiple applications requi...

SKU: AF-423 | Brand: Adafruit

Your friends probably tell you that you are "good with your hands," but now you can also be good with your feet! This foot switch is made of rubbery plastic, is plenty strong to put up with any amount of stomping, and...

SKU: SF-PRT-13061 | Brand: SparkFun

This 6 position screw terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other...

SKU: SF-KIT-13053 | Brand: SparkFun

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1, 2, 4, 8, and 16 Ohms. These resistors are capable of dissipating large amounts of power without damag...

SKU: AF-442 | Brand: Adafruit

Always have the right SMT components at your hand with this awesome 0603 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape 0603 SMT components, sorted, labeled and ready to go....

SKU: SF-PRT-10853 | Brand: SparkFun

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects ma...

SKU: AF-454 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED 8x8 matrix. 0.8" square, it's got everything a big LED matrix has, but bite-sized! There are 16 pins on the side, 8 on each, with 0.1" spacing ...

SKU: AF-455 | Brand: Adafruit

A compact 8×8 red LED matrix (KWM-30881CVB) measuring 30.5 mm (1.2") per side. The ultra-bright red LEDs are arranged in a grid with 16 pins (8 per side) on standard 2.54 mm (0.1") pitch, allowing the display to plug ...

SKU: AF-458 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded bi-color LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! Every grid has two LEDs inside so...