Components

SKU: SF-PRT-08867 | Brand: SparkFun

Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for projects where the wire has a bend or stress point. Comes in small spoo...

SKU: AF-2788 | Brand: Adafruit

A DC barrel jack adapter cable that converts a 3.5/1.3 mm or 3.8/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Internal spring contacts accommodate outer diameters from 3.5 mm to 3.8 mm, making it v...

SKU: SF-SEN-08733 | Brand: SparkFun

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save yo...

SKU: SF-SEN-08680 | Brand: SparkFun

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative posit...

SKU: DF-FIT0280 | Brand: DFRobot

A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-COM-08546 | Brand: SparkFun

A single-digit 7-segment LED display in red with a common anode configuration. Features two decimal point positions, with the right-side decimal point wired and functional. Key Features Single Digit 7-Segment – Com...

SKU: SF-PRT-08534 | Brand: SparkFun

Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, a...

SKU: SF-COM-08357 | Brand: SparkFun

This is a handy little device that can save your system from smoking. A resettable fuse (also known as a PTC) is a resistor that has very unique properties.  For this model, if your circuit tries to draw more tha...

SKU: AF-2945 | Brand: Adafruit

The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your F...

SKU: SF-PRT-08235 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...

SKU: AF-2888 | Brand: Adafruit

A BNC (Bayonet Neill–Concelman) male plug with a screw terminal block for solderless connections. Use stranded or solid-core wire and a small screwdriver to create custom wiring jigs for test equipment, video signals,...

SKU: DF-DFR0238 | Brand: DFRobot

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lig...

SKU: SF-PRT-08084 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...

SKU: SF-COM-08033 | Brand: SparkFun

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the bu...

SKU: SF-COM-11971 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm thread...

SKU: SF-COM-07835 | Brand: SparkFun

A translucent silicone rubber button pad with 16 buttons in a 4×4 grid. Each button has a hole underneath that accepts a standard 3 mm or 5 mm LED, allowing you to backlight individual buttons with any colour — includ...

SKU: SF-PRT-11896 | Brand: SparkFun

A standard 10-pin female header with 0.1" (2.54 mm) pitch, designed for through-hole soldering. Mates with standard 10-pin male headers for board-to-board connections, breakout boards, and prototyping. Specifications...

SKU: SF-DEV-13902 | Brand: SparkFun

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: SF-COM-00532 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard, yellow LED. The lens is 3mm in diameter and it is diffused.

SKU: SF-COM-00530 | Brand: SparkFun

A super bright yellow 5 mm LED with a clear lens, delivering high-intensity output that's ideal for indicator lights, visual alerts, and hobby electronics projects. The clear lens provides a focused beam with excellen...