Components

SKU: SF-PRT-25464 | Brand: SparkFun

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful ...

SKU: SF-PRT-27882 | Brand: SparkFun

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the ne...

SKU: SF-PRT-19167 | Brand: SparkFun

This is a compact E10 mini screw bulb holder supplied with a matching bulb, handy for simple lighting projects, demonstrations and low-voltage circuits.The included bulb is rated for 1.5 volts at 0.3 amps, making it s...

SKU: SF-PRT-28007 | Brand: SparkFun

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The...

SKU: SF-PRT-28005 | Brand: SparkFun

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables bet...

SKU: SF-PRT-28765 | Brand: SparkFun

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mo...

SKU: SF-SPX-21226 | Brand: SparkFun

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and i...

SKU: SF-PRT-21505 | Brand: SparkFun

This 12-position screw terminal block is a simple way to make secure wire connections on a PCB or prototyping board. Each position uses a screw clamp, making it handy for bringing external wiring into a circuit withou...

SKU: SF-PRT-28385 | Brand: SparkFun

This is a simple single-row female header socket with 14 holes, suitable for standard 0.1 inch prototyping layouts.Use it for removable connections on perfboard, custom PCBs, breakout boards, shields or other maker pr...

SKU: SF-TOL-18471 | Brand: SparkFun

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them...

SKU: SF-TOL-18472 | Brand: SparkFun

These threaded inserts are a handy way to add strong, reusable fixing points to a jig, fixture or machine wasteboard. Place a few exactly where you need hold-down points, or install them in a grid pattern to turn a wa...

SKU: SF-PRT-10316 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for lifting a PCB off the bench or mounting a board neatly inside an enclosure.It is 3/8" long and tapped for a 4-40 screw, making it handy for projects that use common ...

SKU: SF-PRT-26989 | Brand: SparkFun

This nylon standoff is a simple hardware spacer for raising a PCB off a surface or mounting it neatly inside an enclosure. It is tapped for a 4-40 screw and measures 3/4" long.Use it to give your board clearance from ...

SKU: SF-PRT-21328 | Brand: SparkFun

This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.I...

SKU: AF-6050 | Brand: Adafruit

This compact breakout is made for slim USB-C projects where a standard horizontal or vertical connector would sit too high. Its sunken Type-C connector straddles the PCBA, helping keep your build low profile while sti...

SKU: AF-5634 | Brand: Adafruit

This breakout makes it easier to prototype with external QSPI flash memory, as used by many modern microcontrollers such as RP2040, ESP32, RT10xx and STM32 series devices. It carries a W25Q128JVSSIQ flash chip, giving...

SKU: AF-6058 | Brand: Adafruit

Add programmable colour to patios, balconies, displays and outdoor-style decorations with this bulb strand fitted with NeoPixel RGB LEDs. Each strand has 20 cafe-style bulbs, and each bulb is individually addressable ...

SKU: AF-6059 | Brand: Adafruit

This decorative bulb strand gives you the café-light look for patios, fences, displays and event installations, with individually addressable RGBW control in every bulb. Each bulb contains a triple RGBW LED, so you ca...

SKU: AF-6158 | Brand: Adafruit

This diffused acrylic backlight strip gives you an easy way to add a smooth, colourful glow to projects. It is the kind of light guide normally found behind LCD panels, but this version uses a single RGB LED so you ca...

SKU: LB-PT91039 | Brand: Little Bird

Great for Arduino and Raspberry Pi!Package Included: 10 x Copper female-Female seat (M3 * 20 mm) 10 x Copper female-Female seat (M3 * 30 mm) 10 x Copper male-Female seat (M3 * 10 +6 mm) 10 x Copper male and femal...