Components

SKU: SF-COM-26984 | Brand: SparkFun

This compact IR emitter is a light emitting diode designed to transmit infrared signals, such as those used in remote control and generic IR communication projects.It operates at 940nm, making it suitable for common i...

SKU: SF-COM-26850 | Brand: SparkFun

This compact 5-way directional pad gives your microcontroller project a familiar tactile input for up, down, left, right and centre presses.It is an SMD switch, making it suitable for custom PCBs where you need a low-...

SKU: SF-COM-29198 | Brand: SparkFun

The IRF7509 is a common N- and P-channel MOSFET device for switching higher-power loads from low-power control signals. Its low on-resistance helps reduce losses, while the logic-level gate is suited to control from m...

SKU: SF-COM-29391 | Brand: SparkFun

This black 25mm potentiometer knob is a simple, sturdy control knob for adding a clean finish to panel-mounted pots and other compatible controls.It slides onto the potentiometer shaft and uses a key lock to help it h...

SKU: SF-COM-29759 | Brand: SparkFun

The DA7280 is a surface-mount haptic driver IC for linear resonant actuators (LRA) and eccentric rotating mass (ERM) motors. It provides automatic closed-loop LRA resonant frequency tracking to help maintain consisten...

SKU: SF-COM-29764 | Brand: SparkFun

Capacitors are one of the staple components you will reach for again and again when building electronics projects. They store and release electrical energy, making them useful for filtering noise in power supplies, cr...

SKU: SF-COM-17756 | Brand: SparkFun

The TIP122G is a high-power NPN Darlington transistor for switching heavier loads from a low-current microcontroller output. It is well suited to projects where an Arduino, Raspberry Pi or similar controller needs to ...

SKU: SF-COM-30230 | Brand: SparkFun

This compact surface-mount DIP switch provides 8 individual switch positions for adding simple, user-selectable controls to a PCB.Each position is an SPST slide switch, making it suitable for general control switching...

SKU: SF-COM-17994 | Brand: SparkFun

This 220 Ohm through-hole resistor is a handy general-purpose component for breadboards, perf boards and other prototype builds.It is a 1/4 Watt PTH axial resistor with ±5% tolerance, made with carbon film constructio...

SKU: SF-COM-24838 | Brand: SparkFun

This APA102C, also known as DotStar, is a 5050-sized SMD addressable RGB LED for adding bright, colourful lighting to custom boards and compact projects.It has an integrated control circuit embedded inside the LED pac...

SKU: SF-COM-26985 | Brand: SparkFun

This is a surface-mount aluminium electrolytic capacitor for compact PCB assemblies. It provides 22µF capacitance with a 35V rated voltage and ±20% tolerance.The capacitor is polarised and intended for SMD placement, ...

SKU: SF-COM-17735 | Brand: SparkFun

This compact yellow LED is a basic surface-mount indicator in the common 1206 package size. It is the same yellow LED used on SparkFun RedBoard products and suits general PCB indicator, status and signalling applicati...

SKU: SF-COM-30019 | Brand: SparkFun

This through-hole ceramic capacitor provides 0.47 µF capacitance with a 25V rated voltage. It is a simple PTH component suited to repairs, prototyping, education, and maintaining existing designs that already use this...

SKU: SF-COM-29763 | Brand: SparkFun

Stock up your parts drawers with a handy mix of general-purpose transistors for prototyping, repairs and everyday circuit building. Transistors are core components in modern electronics, used for tasks such as switchi...

SKU: SF-COM-30155 | Brand: SparkFun

This surface-mount resistor provides a very low resistance value of 220 mOhms with ±1% tolerance, making it useful for compact PCB designs where precise low-value resistance is required.It is a thick film SMD part wit...

SKU: SF-COM-30152 | Brand: SparkFun

This is a basic 1µF ceramic capacitor rated for 50V, suitable for simple through-hole electronics work, repairs, prototypes and breadboard-friendly assemblies where this tolerance and dielectric type are appropriate.I...

SKU: SF-COM-30151 | Brand: SparkFun

This is a basic through-hole ceramic capacitor with a capacitance of 1000pF, rated for 100V with ±5% tolerance. It is suited to general electronics builds, repairs and prototyping where a small, stable ceramic capacit...

SKU: SF-COM-30150 | Brand: SparkFun

This is a basic 10pF ceramic capacitor with a 200V rated voltage and ±5% tolerance. It uses a through-hole PTH format, making it suitable for breadboard-friendly prototyping and soldered PCB builds.The capacitor has s...

SKU: SF-COM-17073 | Brand: SparkFun

This high-capacitance multilayer ceramic capacitor (MLCC) provides 10µF in a compact 1206 surface-mount package.Rated for 50V with an X5R dielectric and ±10% tolerance, it is suited to power supply filtering, bypassin...

SKU: SF-COM-30223 | Brand: SparkFun

This solid tantalum capacitor provides 10μF capacitance with a 16VDC rating in a compact surface-mount A Case package, also known as EIA 3216.It is a polar capacitor with ±10% tolerance, low ESR of 5 Ohms, and operati...